98valk
04-14-2015, 02:42 PM
Hey Guys,
This probably won't interest many, but maybe some. I never liked having to reach down to change my preset channels, so I basically didn't.
So, I finally did something about it. I built a little circuit that will step from the first to the sixth channels. You could add one more output and have all 12 channels available. That is more than I need and a bit tedious to step through.
I found a place to cram a small push button switch on the handlebar. I like it.
I built two options. The first one is probably more dependable. Once it worked, I rebuilt it neater/cleaner and used a slightly different reset. Both work. Maybe someone like EC could mass produce these.
Anyway, here are some pics:
13160
Preset channel control board
13161
Handlebar push button
13162
Where I tapped in for the presets - 12 pin connector
13163
Schematic with two options
This probably won't interest many, but maybe some. I never liked having to reach down to change my preset channels, so I basically didn't.
So, I finally did something about it. I built a little circuit that will step from the first to the sixth channels. You could add one more output and have all 12 channels available. That is more than I need and a bit tedious to step through.
I found a place to cram a small push button switch on the handlebar. I like it.
I built two options. The first one is probably more dependable. Once it worked, I rebuilt it neater/cleaner and used a slightly different reset. Both work. Maybe someone like EC could mass produce these.
Anyway, here are some pics:
13160
Preset channel control board
13161
Handlebar push button
13162
Where I tapped in for the presets - 12 pin connector
13163
Schematic with two options