Installed a shorted center stand

[Steve 0080]

After lowering the front and going Darkside, I could not put the bike on the center stand by myself! Problem solved, cut one inch out of a center stand and reinstalled!!! Perfect !!!

[F6B1911]

.... Inquiring minds would like to see some PICs of this.

[srt8-in-largo]

I was wondering why you couldn't get your bike on the center stand... :icon_biggrin:

[Steve 0080]

I was wondering why you couldn't get your bike on the center stand... :icon_biggrin:

put your back tire on a 2x4 and go ahead and try it out !!!

[Steve 0080]

.... Inquiring minds would like to see some PICs of this.



Not much to see...cut off bottom 1" and weld new plates onto the bottom....Machine Shop, new paint job and delivered ...$60.00

[Battoo]

I have a std F6B , i installed a ride on stand on my 2012 wing BTW love it , plan is to get parts needed to install on F6B i too will have to cut and reweld as the bike as been lowered 1 inch any one got a line on the parts ie bolts , spring and spring peg

[Steve 0080]

50355-MJG-670
90601-MCA-A00
50504-MCA-000
50503-MCA-000
90602-MCA-A00
50538-MCA-000
50525-MCA-000

These can/should be able to be purchased for under $35

[Battoo]

Kool Thanks , i plan to check a trike owner i know see If it was still on the trike yea I am Cheap