Has anyone installed these? Kuryakyn 7448 Black LED Front Reflector Conversi

[taxfree4]

Curious to see if anyone installed these, being actual lights and not just reflectors I think they would be an added level ofsafety.

[stroguy]

Where would they go?

[shortleg0521]

Where would they go?
Upfront by the front wheel next to the fork tube where the stock one is now.
shortleg

[stroguy]

Lemmee look.






I see.

[Fla_rider]

They replace the two fork reflectors with lights. Lots of members have made this conversion. More lights, more viz!

[taxfree4]

If you have any pictures or video of them it would be appreciated.

[GiddyupF6B]

I have them, they're great! Add light and extra visibility up front plus added turn signals.

[Fla_rider]

Wing stuff has a video but they don't show the lights on. They are Kury lights.

[RickW]

Curious to see if anyone installed these, being actual lights and not just reflectors I think they would be an added level ofsafety.

I had them on mine until recently. I just took the black fork covers off and replaced them with the Chrome Lighted Fork Covers.
Those work fine, look good and are very noticeable. You do need to install a quick disconnect so you can remove your covers if you ever need to. Also the specific bike adapters do not come with those. After you get the adapters your can tie as much in as you want.
I do not need mine. If anyone wants them you can have them for $30 including shipping anywhere in the Cont. US.
I will throw in some quick disconnects. You will need to run wire down each side and tie into the bike.
In the picture below you can see them lit up in the daytime .
http://i11.photobucket.com/albums/a182/rmwiles/2014%20Pictures/Motorcycle%20Pictures/RickDealsGap0914-4-C_zps6ccec403.jpg

[stroguy]

Screw the lights, that's one badazz pic Rick. Nice.

[smokinjoe187]

Screw the lights, that's one badazz pic Rick. Nice.

ooooooooh shiny!!!!

[taxfree4]

I had them on mine until recently. I just took the black fork covers off and replaced them with the Chrome Lighted Fork Covers.
Those work fine, look good and are very noticeable. You do need to install a quick disconnect so you can remove your covers if you ever need to. Also the specific bike adapters do not come with those. After you get the adapters your can tie as much in as you want.
I do not need mine. If anyone wants them you can have them for $30 including shipping anywhere in the Cont. US.
I will throw in some quick disconnects. You will need to run wire down each side and tie into the bike.
In the picture below you can see them lit up in the daytime .
http://i11.photobucket.com/albums/a182/rmwiles/2014%20Pictures/Motorcycle%20Pictures/RickDealsGap0914-4-C_zps6ccec403.jpg
I'll take them, I'll send you a PM

[MOJO]

Yep, I have them and they look great with easy install. Only tricky point was running the wires through the front mirror/turn signal housing area through the handlebars. I used a coat hanger to pull them through. At night they look great and function well.

[Steve 0080]

I have them but of course mine are CHROME!!! fairly easy install...wire tie the wires up the brake lines and they are well hidden!!!

[shooter]

Seeing Ricks pic gives me chrome envy. I'm getting there but its putting a dent in my wallet.