Rivco Highway peg mount

[flat6bagger]

Do any of you have any experience with this mount by Rivco?
1” OR 11/4” ENGINE GUARD MOUNTS FOR HIGHWAY PEGS.
13884
I was wondering with pegs mounted if they stick way out.
thanks,
Doug

[DaWadd]

New product from Rivco I believe. Was looking at them on their website and maybe a good option to their very pricey highway pegs. I don't think they would stick out any more than the Kurys or MickOPegs. I'm thinking going that route but only come in chrome .

[jm21ddd15]

I don't have the Rivco, I have the Kury- Ergo II. Looking at your pic, it is very similar. They do stick out somewhat, but the Kurys will fold up, maybe the Rivco also does, when not in use, but they have to stick out a bit, or you wont get your legs around the lower fairing so to rest your feet. When mounted properly, they don't interfere with turning/leaning.

[flat6bagger]

Thanks JM.
I am not wanting chrome,so I guess this is a moot point when only available in chrome.

[jm21ddd15]

The Ergo II's I got were gloss black. Got them thru Cruiser Customizing. $184.95. Standard shipping was free, and took less than a week.

[flat6bagger]

Jm,
how far back did they come?
I am short legged at 30" inseam.

[jm21ddd15]

I have a 32" inseam and they work great for me. 2" shorter may be a slight issue. I am not quite fully stretched, but close. They do have several adjustment positions, though. They are a 3 piece unit- 1st piece mounts on the crash bar, the second- the " arm", mounts to that, and finally the footrest mounts to the arm. The arm is about 2" long. I have seen the Ergo III models that now offer a 4" arm. The arm will pivot forward and back and up or down , to your preference. You may be able to get a 4" arm for the Ergo II also.

[flat6bagger]

I will check into the longer arm.
Thanks for the reply.
I was afraid I would be to extended.