PDA

View Full Version : GPS mount glove box cover


bikeng
06-06-2015, 07:34 PM
Somebody has to come up with a good GPS mount to fit on glove box cover!
Steve 0080
06-06-2015, 07:57 PM
Do a search..... it has been done a few times !!! http://hondaf6b.com/search.php?searchid=564142



http://hondaf6b.com/search.php?searchid=564148
ths61
06-06-2015, 08:06 PM
What Steve said:

http://hondaf6b.com/showthread.php?361-GPS-mount&highlight=Mount

http://hondaf6b.com/attachment.php?attachmentid=698&d=1371486741
srt8-in-largo
06-06-2015, 11:12 PM
Why would you want it mounted so low?
flat6bagger
06-07-2015, 06:49 AM
I was thinking the same thing as George.
I want one more closely to eye level.
I don't want to be looking down any more than I have to while riding.

Doug
Steel Cowboy
06-07-2015, 06:50 AM
I have mine in the same position, I run the USB power lead from under the lid. I just used velco to attach it and put it in the GSP in the box when I dont need it
flat6bagger
06-07-2015, 06:55 AM
I have mine in the same position, I run the USB power lead from under the lid. I just used velco to attach it and put it in the GSP in the box when I dont need it

Do you constantly look down at it?

Doug
Fla_rider
06-07-2015, 07:44 AM
Mounting it lower presents sun issues, higher the mount the better guys. Here is my simple solution.

3086
Steve 0080
06-07-2015, 08:13 AM
The sky is the limit on mounting any type of unit... as far as a GPS goes... it would be better higher, but really how much do you look at it? If you run the sound thru your helmet, maybe less, for example from Sanford to Franklin is maybe three turns?
ths61
06-07-2015, 01:41 PM
Can anyone post their Texelent Accessory Bar GPS install picts ?

http://wingstuff.com/system/uploads/main_image/000/025/345/original.png
Steel Cowboy
06-07-2015, 08:15 PM
Do you constantly look down at it?

Doug

Only when I need to, I ware an open face and its clearly visible. Bluetooth through the head set
srt8-in-largo
06-07-2015, 08:52 PM
Can anyone post their Texelent Accessory Bar GPS install picts ?



After quite a bit of consideration, IMO this bar isn't really worth it... unless you have a ton of devices or you just want stuff mounted down low. A RAM mount (or two or three) on the handlebars seems to hold everything most people need and puts the device more in your line of sight, but at the same time, without being obtrusive.
Steve 0080
06-07-2015, 09:21 PM
Can anyone post their Texelent Accessory Bar GPS install picts ?

http://wingstuff.com/system/uploads/main_image/000/025/345/original.png


Had I seen this unit when I bought my bike I would have purchased it !!!!!.....only issue would be wires going everywhere !!!
ths61
06-07-2015, 09:35 PM
Had I seen this unit when I bought my bike I would have purchased it !!!!!.....only issue would be wires going everywhere !!!

I thought about drilling the bottom of the bar and running the wires inside of the bar, but am concerned about weakening the structural integrity.

Some have mentioned it has firmed up the handle bars as well.