PDA

View Full Version : F6B Seat Tie Down Brackets?



buckeyeken47
06-07-2015, 11:57 AM
Has anyone found bungee tie down brackets which are designed for the F6B?
I could only find products which aren't designed for our bike.

bobbyf6b
06-07-2015, 12:18 PM
These are what I use and they work great. You get three pair of different sizes for $15.

http://www.aerostich.com/aerostich-frame-loops.html

Steve 0080
06-07-2015, 12:29 PM
What exactly are bungee tie down brackets??? The pic above is what I call a soft tie.....

bobbyf6b
06-07-2015, 12:39 PM
What exactly are bungee tie down brackets??? The pic above is what I call a soft tie.....

Like this, but they're for the full wing.

http://wingstuff.com/products/33309-bungee-assist-brackets-rust-free-easy-seat-bolt-combo?context=gold_wing_gl1800-racks_travel_luggage

Steve 0080
06-07-2015, 12:57 PM
They will fit on the F6 !!! Great addition if hauling a pac on the back seat...drill some holes in the back rest riser and these and nothing will come off the bike !!!

buckeyeken47
06-07-2015, 01:32 PM
Please post a pic. I'd like to see exactly where you drilled and which brackets you used.

Hornblower
06-07-2015, 01:48 PM
They will fit on the F6 !!! Great addition if hauling a pac on the back seat...drill some holes in the back rest riser and these and nothing will come off the bike !!!

Steve-I don't think those brackets referenced from Wingstuff fit well at all. In the first place, the bolts shown definitely won't work on the F6B because our bikes require longer front bolts. Second, the brackets don't fit well either due to the F6B grab rail design. That's not to say you can't use them but they just don't fit quite right, especially with the back bolts. I am using a couple of the brackets with the front bolts but modified them to work with ROK straps. As you can see in the pic below (sorry for poor shot), I cut a slot in the brackets and added edge guard to prevent wear on my straps. This setup works reasonably well.

14466

flat6bagger
06-07-2015, 03:48 PM
I bought the ones Steve posted and sent them back.
They do not fit at all.
I refuse to drill through a beautiful powder coated riser.
Uh Uh..no way..ain't gonna happen.

Doug

Steve 0080
06-07-2015, 03:53 PM
On second thought the ones I saw where on a wing... sorry.....:icon_redface: