View Full Version : accessory plug
2bikemike
07-06-2015, 03:09 PM
Note for anyone installing a 12v accessory plug in the left compartment. Make sure when you drill the 7/8 mounting hole you put it about halfway down the box to allow clearance under the fairing it mounts in. Otherwise you will need to get a 7/8 plug on your next trip to the hardware store.
stroguy
07-06-2015, 03:15 PM
How could you possibly know that?
2bikemike
07-06-2015, 03:22 PM
How could you possibly know that?
Lets just say I just got back from the hardware store. LOL
unsub
07-06-2015, 03:27 PM
Honda has already marked the drill spot. If you look closely you can see the recommended start point.
https://www.youtube.com/watch?v=COuTOlXT0tU
F6B1911
07-06-2015, 05:30 PM
Note for anyone installing a 12v accessory plug in the left compartment. Make sure when you drill the 7/8 mounting hole you put it about halfway down the box to allow clearance under the fairing it mounts in. Otherwise you will need to get a 7/8 plug on your next trip to the hardware store.
My cubby had a bullseye X where the hole should be drilled, drilled it there and had no problem.
unsub
07-06-2015, 06:02 PM
2bikemike. Thanks all the same for the heads up. Welcome, if I haven't mentioned it before.
We do have access to a library of Honda .pdf installation diagrams for different accessories. Maybe before your next project check out the library to see if it will cover off what you want to install. I don't have the link but maybe someone else has and can post it again for you.
Ride safe.
F6B1911
07-06-2015, 06:12 PM
2bikemike. Thanks all the same for the heads up. Welcome, if I haven't mentioned it before.
We do have access to a library of Honda .pdf installation diagrams for different accessories. Maybe before your next project check out the library to see if it will cover off what you want to install. I don't have the link but maybe someone else has and can post it again for you.
Ride safe.
http://powersports.honda.com/documentum/MW01/08E70-MJG-670.pdf
edgeman55
07-06-2015, 07:05 PM
You know the old sayin "Measure twice cut once".Been there done that:icon_doh:
lloydmoore1
07-06-2015, 07:45 PM
Note for anyone installing a 12v accessory plug in the left compartment. Make sure when you drill the 7/8 mounting hole you put it about halfway down the box to allow clearance under the fairing it mounts in. Otherwise you will need to get a 7/8 plug on your next trip to the hardware store.
Its a battle scar that you will look at and laugh every time you open it..all good
Steve 0080
07-06-2015, 07:47 PM
I added two power ports...after I had one installed, decided I needed two...not that I have ever used it.... I bought another cubby, drilled both holes straight away as it was easier for me at that angle...
Ericb445
07-06-2015, 07:49 PM
I was gonna say there is a nice BIG X where to drill:shrug:
Jrockr
07-08-2015, 05:29 PM
2bikemike. Thanks all the same for the heads up. Welcome, if I haven't mentioned it before.
We do have access to a library of Honda .pdf installation diagrams for different accessories. Maybe before your next project check out the library to see if it will cover off what you want to install. I don't have the link but maybe someone else has and can post it again for you.
Ride safe.
where is this library, i cant find it..
unsub
07-08-2015, 10:21 PM
where is this library, i cant find it..
Post #7
F6b1911 was kind enough to post a link.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.