accessory plug

[2bikemike]

Note for anyone installing a 12v accessory plug in the left compartment. Make sure when you drill the 7/8 mounting hole you put it about halfway down the box to allow clearance under the fairing it mounts in. Otherwise you will need to get a 7/8 plug on your next trip to the hardware store.

[stroguy]

How could you possibly know that?

[2bikemike]

How could you possibly know that?
Lets just say I just got back from the hardware store. LOL

[unsub]

Honda has already marked the drill spot. If you look closely you can see the recommended start point.

https://www.youtube.com/watch?v=COuTOlXT0tU

[F6B1911]

Note for anyone installing a 12v accessory plug in the left compartment. Make sure when you drill the 7/8 mounting hole you put it about halfway down the box to allow clearance under the fairing it mounts in. Otherwise you will need to get a 7/8 plug on your next trip to the hardware store.

My cubby had a bullseye X where the hole should be drilled, drilled it there and had no problem.

[unsub]

2bikemike. Thanks all the same for the heads up. Welcome, if I haven't mentioned it before.

We do have access to a library of Honda .pdf installation diagrams for different accessories. Maybe before your next project check out the library to see if it will cover off what you want to install. I don't have the link but maybe someone else has and can post it again for you.

Ride safe.

[F6B1911]

2bikemike. Thanks all the same for the heads up. Welcome, if I haven't mentioned it before.

We do have access to a library of Honda .pdf installation diagrams for different accessories. Maybe before your next project check out the library to see if it will cover off what you want to install. I don't have the link but maybe someone else has and can post it again for you.

Ride safe.


http://powersports.honda.com/documentum/MW01/08E70-MJG-670.pdf

[edgeman55]

You know the old sayin "Measure twice cut once".Been there done that:icon_doh:

[lloydmoore1]

Note for anyone installing a 12v accessory plug in the left compartment. Make sure when you drill the 7/8 mounting hole you put it about halfway down the box to allow clearance under the fairing it mounts in. Otherwise you will need to get a 7/8 plug on your next trip to the hardware store.

Its a battle scar that you will look at and laugh every time you open it..all good

[Steve 0080]

I added two power ports...after I had one installed, decided I needed two...not that I have ever used it.... I bought another cubby, drilled both holes straight away as it was easier for me at that angle...

[Ericb445]

I was gonna say there is a nice BIG X where to drill:shrug:

[Jrockr]

2bikemike. Thanks all the same for the heads up. Welcome, if I haven't mentioned it before.

We do have access to a library of Honda .pdf installation diagrams for different accessories. Maybe before your next project check out the library to see if it will cover off what you want to install. I don't have the link but maybe someone else has and can post it again for you.

Ride safe.


where is this library, i cant find it..

[unsub]

where is this library, i cant find it..

Post #7

F6b1911 was kind enough to post a link.