Flashing brake lights

[Davidk]

https://www.superbrightleds.com/moreinfo/strobe-bulbs/7443-led-bulb-w-brake-flasher-dual-function-1-high-power-led-wedge-retrofit-car/925/2276/#/tab/Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. Running lights are brighter than factory and lights flash 3 times each time the brakes are engaged.


https://www.youtube.com/watch?v=iyPJBAKEArg&feature=youtu.be

[CopperMike]

Nice. How many bulbs did it take?

[Davidk]

Nice. How many bulbs did it take?


Two bulbs

[willtill]

Very nice. Think I'll pick up a pair of those. Should compliment my Hyperlites very nicely. :icon_cool:

[wjduke]

I ordered them...was going to get a brake light modulator anyway...thanks for the post.

[shooter]

I thought your name was "no mod Duke"? Who is this stranger.

[wjduke]

I thought your name was "no mod Duke"? Who is this stranger.

Gotta do some little things shooter....I had a modulator on the 9. This is better and cheaper. I'm done now...:shhh:

[Old Ryder]

I love my Superbrites! :yes:

[stroguy]

Great simple mod. Love my flashy's as well.



Gotta do some little things shooter....I had a modulator on the 9. This is better and cheaper. I'm done now...:shhh:

Here's a simple security system for your bike.

Place sticker in a visible spot.

18075

[114th COBRA]

Definitely a good mod. Gonna have to get me a set of those. I wanna be seen. Thanks for the info.

[F6bisnext]

Do you need to purchase the resistor kit as well, or are these just plug and play replacements?

[Old Ryder]

These are plug and play. With all the lights I have added, the only system modification was to replace the turn signal flasher.

[wjduke]

Do you need to purchase the resistor kit as well, or are these just plug and play replacements?

I had that same question, but I believe that to be for the turn signal blink rate. Hope not, because I didn't order that!

[stroguy]

No resistor needed.

[wjduke]

No resistor needed.

:yes:

[wjduke]

:yes:

Mine just came in...need to find time to install them and the center stand. I'm at work, bike isn't here, I want to ride, blah blah blah. I can't wait to see them though!

[RickJ]

Gotta do some little things shooter....I had a modulator on the 9. This is better and cheaper. I'm done now...:shhh:

I'm done now!!!!!!!!!!!!!!!!!!!!!!!!!HAHAHAHAHAJEJEJEJEJEHA HAHAHAHA

[wjduke]

I'm done now!!!!!!!!!!!!!!!!!!!!!!!!!HAHAHAHAHAJEJEJEJEJEHA HAHAHAHA

What, you don't believe me? :icon_biggrin:

Installed the flashing lamps last night....easy and worth every penny.

[BradS]

I came off of a full dress wing. I had mounted the Whelen TIR 3 and connected it to the brakes. I planned on doing the same on the "B" then a saw theSuper Brite brake mod. It is not as bright as a Whelen, but install is much easier and it goes solid after three flashes. Install is simple and well worth it.

[BigAl1952]

I love mine got them several months ago. Easy to install Al

[carpdm]

Thanks for posting.

[F6bisnext]

https://www.superbrightleds.com/moreinfo/strobe-bulbs/7443-led-bulb-w-brake-flasher-dual-function-1-high-power-led-wedge-retrofit-car/925/2276/#/tab/Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. Running lights are brighter than factory and lights flash 3 times each time the brakes are engaged.


https://www.youtube.com/watch?v=iyPJBAKEArg&feature=youtu.be

Thanks for not only telling us exactly what you bought, but also how to do it. I would NOT have tried this myself if it was not for your instructions. It did truly take 10 minutes and they work awesome. Thanks again. I am not mechanically inclined but your easy instructions made me want to try it myself.

[Davidk]

Thanks for not only telling us exactly what you bought, but also how to do it. I would NOT have tried this myself if it was not for your instructions. It did truly take 10 minutes and they work awesome. Thanks again. I am not mechanically inclined but your easy instructions made me want to try it myself.

Glad to hear that my post was so helpful. I'm in the same boat and not very daring, so I like to hear other peoples experiences as well. I don't post a lot, but I figure that if I have a question, or an answer, there is probably someone else looking for the same info.

[unsub]

Hey Davidk I just installed these myself. Thanks again for posting the original information.

During the install I found the lamp socket on the left side was somewhat melted and will be replaced, but the upside is these LED's will run much cooler.

:icon_biggrin:

18301

[Airborne06]

Thanks for the post Davidk! I just ordered a set of the Super Bright LEDs. Anything that keeps the crazies off of my a$$ is worth every penny!

[Injun Joe]

So if you just want a couple back off flashes and don't care about fancy patterns, these are the way to go, right?

[114th COBRA]

Finally got around to getting them ordered. Can't wait to get them installed. Since the weather is bad, good time to get it done.

[Retired Army]

Great simple mod. Love my flashy's as well.




Here's a simple security system for your bike.

Place sticker in a visible spot.

18075And be the first in your neighborhood to have a politically correct motorcycle.

[billsim]

https://www.superbrightleds.com/moreinfo/strobe-bulbs/7443-led-bulb-w-brake-flasher-dual-function-1-high-power-led-wedge-retrofit-car/925/2276/#/tab/Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. Running lights are brighter than factory and lights flash 3 times each time the brakes are engaged.


https://www.youtube.com/watch?v=iyPJBAKEArg&feature=youtu.be

Thanks for the info. I just placed my order. This will complete my rear lighting/ safety upgrades.
Bill

[CopperMike]

Just wanted to add my thanks for finding and posting this. Also not mechanically inclined and followed your directions and got it done pretty easily.

Mike

[Davidk]

Just wanted to add my thanks for finding and posting this. Also not mechanically inclined and followed your directions and got it done pretty easily.

Mike


Thanks for letting me know. Glad its been helpful to so many people!

[six2go]

https://www.superbrightleds.com/moreinfo/strobe-bulbs/7443-led-bulb-w-brake-flasher-dual-function-1-high-power-led-wedge-retrofit-car/925/2276/#/tab/Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. Running lights are brighter than factory and lights flash 3 times each time the brakes are engaged.


https://www.youtube.com/watch?v=iyPJBAKEArg&feature=youtu.beHey David, I hope it's as easy as you say. I just placed my order and should have them by the middle of the week. I'm not afraid to use a wrench, but the plastic covers on this bike just scare the sh!t outa me.:yikes:

[stroguy]

Don't be scared, they pop of easy. One beer, one wrench and 20 minutes......done.

[wjduke]

I'm no mechanic and managed it just fine. Don't over tighten when putting back together. Snug on the inside nut. I over did one just a little....no harm done, but thought I'd mention it.

[six2go]

Thanks for letting me know. Glad its been helpful to so many people!

Just as you said! My Super Brights came in today's mail @ 10:00AM, had them installed and everything buttoned up by 10:45.(Had to finish reading the paper before I went to the garage).

Thanks for the encouraging post.

[SierraKen]

Ordered mine. Hope to receive next week. Many thanks for your original post.

[Chuckv]

https://www.superbrightleds.com/moreinfo/strobe-bulbs/7443-led-bulb-w-brake-flasher-dual-function-1-high-power-led-wedge-retrofit-car/925/2276/#/tab/Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. Running lights are brighter than factory and lights flash 3 times each time the brakes are engaged.


https://www.youtube.com/watch?v=iyPJBAKEArg&feature=youtu.be

Where did you get the LED bulbs, and what is the number for them? Thanks Chuck.

[Airborne06]

I came off of a full dress wing. I had mounted the Whelen TIR 3 and connected it to the brakes. I planned on doing the same on the "B" then a saw theSuper Brite brake mod. It is not as bright as a Whelen, but install is much easier and it goes solid after three flashes. Install is simple and well worth it.

I have them both. The 3 flash brake lights, and the Whelen that continues to flash. It may be annoying to the person sitting behind me, but it is better than getting hit from the rear by a distracted driver.

[Ridlikhel]

Just installed my first mod and boy was it easy to do and man does it make a difference.

Thanks for the post, it could be a life saver.

[Circle-5]

Two bulbs

Since there is no common flasher, how do the two bulbs flash together in synchronized fashion?

[wiggy]

Since there is no common flasher, how do the two bulbs flash together in synchronized fashion?

I'm an electrician myself but I'm going to say it works on FM...the second letter stands for Magic. :stirthepot: :stirthepot: :lolup:

Btw, I have these LEDs myself and they are every bit as advertised. Thanks much, Davidk!

[stroguy]

Since there is no common flasher, how do the two bulbs flash together in synchronized fashion?

The circuitry in each bulb is identical. When power is applied the circuit turns on and flashes independently of the other. It just appears they are in sync, which they are, but they ain'tnot.

[Davidk]

The circuitry in each bulb is identical. When power is applied the circuit turns on and flashes independently of the other. It just appears they are in sync, which they are, but they ain'tnot.

This. Except for the "ain'tnot." Is that a TX term designed to confuse normal folk?

[Circle-5]

The circuitry in each bulb is identical. When power is applied the circuit turns on and flashes independently of the other. It just appears they are in sync, which they are, but they ain'tnot.

Thank you for the explanations. So basically, the precision of the internal semiconductor manufacturing tolerances is what reduces the timing variations between LED flashes to imperceptible levels. I think I can handle zero wiring, so I just ordered a set. Many thanks to Davidk for introducing this product.

[stroguy]

the precision of the internal semiconductor manufacturing tolerances is what reduces the timing variations between LED flashes to imperceptible levels.

Alan Bourdillion tra-who? Traherne. Traherne.

[Circle-5]

Alan Bourdillion tra-who? Traherne. Traherne.

Exactly.

[Circle-5]

https://www.superbrightleds.com/moreinfo/strobe-bulbs/7443-led-bulb-w-brake-flasher-dual-function-1-high-power-led-wedge-retrofit-car/925/2276/#/tab/Specifications.

Took 5 mins to install. Pull the trim off that sits above the light panel (not sure that you even need to do that). Remove the two 10mm nuts inside both bags to remove the light panel. Pull the wire harness off and rotate the bulb carrier to the left about 1/4 turn to remove. [...]

I removed the two 10mm nuts inside the bags, and ... the light bar didn't even move! So I looked up the 2013 parts view, and sure enough, my "combination light" has 4 nuts instead of 2 (see part #18 in attachment). The other 2 nuts are not easily accessible -- not sure how to reach them and how much plastic I'll have to take out. But I suspect it will take more than 5 mins! :icon_frown:

21982

[stroguy]

I only see 4 total #18 nuts in the pic you attached. There are 2 in each bag. Where are the others you are talking about?

[F6B1911]

only four nuts hold the taillight in place.


21983

[Steve 0080]

Are you guys looking at a GL or F6 tail light ? I am thinking there are only two acorn nuts that are removed...

[53driver]

Are you guys looking at a GL or F6 tail light ? I am thinking there are only two acorn nuts that are removed...

F6B has 4 nuts, 2 inside each saddlebag....

[stroguy]

Yep, only 4 for mine as well.

The original dude video. 4 nuts.

https://www.youtube.com/watch?v=mLf1f0xI0AA

[Greg O]

These are the knats ass, I put these in when it was first posted. The price is right for the safety you get.

[Circle-5]

I only see 4 total #18 nuts in the pic you attached. There are 2 in each bag. Where are the others you are talking about?

D'oh! I thought Davidk meant two nuts altogether. Someone said being older also meant being wiser ... :banghead::banghead::banghead:

[lloydmoore1]

ordered these on Amazon $18.00 for the 2 and best money spent yet. Easy install and great results

[Steve 0080]

F6B has 4 nuts, 2 inside each saddlebag....

My memory is fading very fast !!!!!

[53driver]

Are you guys looking at a GL or F6 tail light ? I am thinking there are only two acorn nuts that are removed...


F6B has 4 nuts, 2 inside each saddlebag....


My memory is fading very fast !!!!!

Florida GLs have three nuts.....one in each pannier and one in the seat...:icon_mrgreen:

[Vondawg]

For a reminder, just think of male Siamese twins......

[stevenolts]

loydmoore1,

I don't see these on Amazon?

Steve

[lloydmoore1]

Steve
Sorry it was ebay. Just type this number into the search
331274100022

http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.X331274100 022.TRS0&_nkw=331274100022&_sacat=0


Lloyd

[stevenolts]

Loyd

I will check when I get home. Ebay is blocked here at work.

Thank you, Steve

[smiley]

Got mine installed last week. I have a lot more sense of well being with the flashing. I've caught myself giving a few extra taps of the levers just for giggles for the tailgaters. Easy install, under 10 mins.

[soberbiker]

I'm an electrician myself but I'm going to say it works on FM...the second letter stands for Magic. :stirthepot: :stirthepot: :lolup:

Btw, I have these LEDs myself and they are every bit as advertised. Thanks much, Davidk!

I had seen this post in the past ad couldn't find it again. Thanks for those who added but I do have a question...

On the web page they have this

(LED Light Load Resistor Kit - LED Turn Signal Hyper Flash & Warning Fix
Option: 50W LED Load Resistor kit)

https://www.superbrightleds.com/moreinfo/flashers-load-resistors/led-light-load-resistor-kit-led-turn-signal-hyper-flash-warning-fix/190/831/

as a extra addition to the bulbs. Is it necessary to purchase this so the circuit "acts" correctly?

[Davidk]

I had seen this post in the past ad couldn't find it again. Thanks for those who added but I do have a question...

On the web page they have this

(LED Light Load Resistor Kit - LED Turn Signal Hyper Flash & Warning Fix
Option: 50W LED Load Resistor kit)

https://www.superbrightleds.com/moreinfo/flashers-load-resistors/led-light-load-resistor-kit-led-turn-signal-hyper-flash-warning-fix/190/831/

as a extra addition to the bulbs. Is it necessary to purchase this so the circuit "acts" correctly?


Just need the two bulbs

[soberbiker]

Just need the two bulbs

Thank you for the quick response David. Placing the order now! :icon_wink:

[soberbiker]

Received mine last week and installed this week. Very pleased with the result. Thanks David for the info on these.

Oh yeah...the install took a bit longer cause of course, why ask for directions? :icon_doh: I think it took all of a 1/2 hr guessing which bolts..

[choptop]

Easy install, to bad one doesn't work, now to get a hold of them and get one before I leave for Sturgis.

[stroguy]

I forget how that bulb goes. Push in? Try spinning that bulb 180 degrees. LEDs are of course polarity sensitive. Even those these bulbs have their own circuit a 180 spin may work.

[choptop]

I forget how that bulb goes. Push in? Try spinning that bulb 180 degrees. LEDs are of course polarity sensitive. Even those these bulbs have their own circuit a 180 spin may work.

Have tried every which way Stro, contacted them, said it is a bulb issue, lights but no flash. Ordered a spare and the replacement is on the way.

[stroguy]

Very good.

[mike2000t]

great addition, and awesome instructions, thanks

[StonedInNy]

These bulbs will b a great addition but what I really like is his string setup in the video. 👍🏼

[Kolsch]

So, my question is... If you already have the brake light modulater installed, how many times would they flash?
I have LED brake/running lights, with the back off modulater installed to flash 3 times then go solid. Would they flash 6 times and go solid?

[stroguy]

So, my question is... If you already have the brake light modulater installed, how many times would they flash?
I have LED brake/running lights, with the back off modulater installed to flash 3 times then go solid. Would they flash 6 times and go solid?

Cmon man, I'm trying to figure where Hoffa is. Don't throw me off track.

[Kolsch]

Stro,
Once you find Hoffa, you could come to the PNW and look for DB Cooper. Heck they might know the awnser. Got the lights on the way!

[stroguy]

Stro,
Once you find Hoffa, you could come to the PNW and look for DB Cooper. Heck they might know the awnser. Got the lights on the way!

That dude lives next door to me. I'll still come. Let's see a video for the final answer when you get them installed.

[Kolsch]

They flash three times at using the running light, then flash 3 times at super bright. It will not let me submit the video.
It will get attention.

[AussieF6B]

got these the other day and installed and they are awesome :yes:

[GNW]

Is this the actual bulb number that I need to order?
I went to the website and found no listing for my 2013 F6B. I got the listing below from a post on the forum but want to make sure it is the one. Thanks.
Part Number: 7443-R3W-FL
UPC: 847781022766

[stroguy]

That's her. Need a pair.

[GNW]

That's her. Need a pair.

Stro you are the best no matter what shooter says bout you!

[GNW]

That's her. Need a pair.


Just installed the pair and I am ecstatic to say the least and they go so good with my super fast red hot rod !

:biker:

[Dirtstiff's F6B]

Thanks David, couldn't be happier with the improvement to the rear lights.


24098

J

[stroguy]

Thanks David, couldn't be happier with the improvement to the rear lights.


24098

J

Lets make sure Rickj gets his acknowledgment. He went where no B had ever gone b4.

http://hondaf6b.com/showthread.php?6493-room-in-rear-lens-for-slightly-larger-brake-tail-bulb

[lloydmoore1]

just an update

I have had these installed for just over a year and one burnt out yesterday. Just ordered 2 more. A very cheap way to be more visible.

They are just plug and play..remove the old bulb and put these in. I have many of my riding buddies say they are so easy to spot me slowing down when I lead a ride.

2X Flashing Strobe Blinking 7443 Red Rear Alert Safety Brake Tail Stop Lights

http://www.ebay.com/itm/2X-Flashing-Strobe-Blinking-7443-Red-Rear-Alert-Safety-Brake-Tail-Stop-Lights/331274100022?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

[53driver]

Ordered these on Tuesday....they got here today.
Installed.

VERY bright!!!!!
Outshines my WIR strobe!

Definitely a great addition to the rear to be seen!!!!
Cheers,
Steve

[lloydmoore1]

yep I'm a dumb arse sometimes...... I ordered a new set thinking I would have one spare. Then I decided to take the tail light off and realized the light had came out of it's housing. After 15 minutes of trying to shake it out off the hole I finally got it out and guess what??? I stuck it back in and it worked.
so now I have 2 spare ones in the mail.
Oh well maybe I will install them in the new 2018 wing next year.....:stirthepot:

[choptop]

Did I say that I love mine !!!!!!!!!!!!!!!!!!!:icon_mrgreen:

[luckyluciano]

How do these compare to the Kuryakyn pulsing brake light controller which I bought last year and have yet to install...lol? Should I stick with that?

[Walcrow]

Thanks DavidK......just ordered mine. Anything that keeps these Dallas NASCAR drivers away from me helps...and it's getting worse here daily.

[unsub]

How do these compare to the Kuryakyn pulsing brake light controller which I bought last year and have yet to install...lol? Should I stick with that?

Check out post #22

[OlyF6B]

Ordered mine at end of last week... arrived today in the mail... took about 15 min to install. You will need to open both saddlebags... locate the two 10mm bolts (head facing front) and loosen them (not on very tight from factory...).

Using a plastic trim pry tool (small one from set bought at Harbor Freight months ago for the car... finally got to use one of them!), gently pull the plastic trim panel above the light fixture -- starting from the outside and gently (gently x2) pulling until you get to the top-center of the trim piece. There is a "catch" there... I used the pry tool to finesse the upper (larger trim piece over tail upwards to release from the top edge of the trim panel.

Then, pulling gently up on the upper trim panel, you can pull the entire light bar assembly out. Use a towel or something to cover the lower trim panel where license plate mounts so you don't inadvertently scratch that plastic.

Locate the two bulb holders -- twist and turn to release -- remove OEM and insert the LEDs (I used latex glove "just in case..." to avoid transferring finger oil to the LEDs). Do a test of the brakes before assembly (reverse all the steps).

I'm liking the simplicity of this mod. Flashing red lights will certainly help vehicles behind "see" that braking is occurring (I sure HOPE at least!). No need for aux. resistors or relays like when adding "Switchback" bulbs for front signals (did that yesterday).

Link for purchasing bulbs... (http://www.ebay.com/itm/like/262895016445?chn=ps&dispItem=1)

[53driver]

Ordered mine at end of last week... arrived today in the mail... took about 15 min to install. You will need to open both saddlebags... locate the two 10mm bolts (head facing front) and loosen them (not on very tight from factory...).

Using a plastic trim pry tool (small one from set bought at Harbor Freight months ago for the car... finally got to use one of them!), gently pull the plastic trim panel above the light fixture -- starting from the outside and gently (gently x2) pulling until you get to the top-center of the trim piece. There is a "catch" there... I used the pry tool to finesse the upper (larger trim piece over tail upwards to release from the top edge of the trim panel.

Then, pulling gently up on the upper trim panel, you can pull the entire light bar assembly out. Use a towel or something to cover the lower trim panel where license plate mounts so you don't inadvertently scratch that plastic.

Locate the two bulb holders -- twist and turn to release -- remove OEM and insert the LEDs (I used latex glove "just in case..." to avoid transferring finger oil to the LEDs). Do a test of the brakes before assembly (reverse all the steps).

I'm liking the simplicity of this mod. Flashing red lights will certainly help vehicles behind "see" that braking is occurring (I sure HOPE at least!). No need for aux. resistors or relays like when adding "Switchback" bulbs for front signals (did that yesterday).

Be advised that:
Even though they fit both ways, they only work in one position AND
A few of us have had them come loose and fall into the tail light lens - recommend a bit of black tape to secure them in place once you get the polarity correct.
Cheers,
Steve

[OlyF6B]

Be advised that:
Even though they fit both ways, they only work in one position AND
A few of us have had them come loose and fall into the tail light lens - recommend a bit of black tape to secure them in place once you get the polarity correct.Cheers, Steve

Thanks for the polarity tip! I got lucky (50% chance on each one that I'd insert incorrectly...both work!). The bulbs from the seller on eBay fit into the holder (plug) really tight, so at this point, I'm not too concerned about them falling out, but will keep an eye on them and maybe check after I've put on some miles (and vibration). Cheers!

Short video (1 of 2) (https://youtu.be/zcEHFmL8Avc) showing "flash"

Video 2 of 2 (https://www.youtube.com/watch?v=Q-gWRLO_APk)