Lo-Beam Cutout Harness

[Elroy]

I've noticed this part is no longer showing up the last place I'd seen it, which was on SoCal's website. And searching their site to all their references to alternate p/n's turn up 0 results. My question, has anyone ordered from E C directly? And is p/n 02114 what I need?

Seems to be, but I'd like to be sure. It's the only cut out harness they have but it does not match the p/n I had written down that was on SoCal's website a while back. Getting ready to order a lot of accessories, from several vendors, and making sure my ducks are in a row first. Thanks!

[Steve 0080]

The search bar is your friend !!!!!!!!!!!!!!!!!!!!!!!!!!!!!



http://hondaf6b.com/showthread.php?466-E-C-Low-Beam-Cutout-Harness-Part-02116&highlight=02116

[Elroy]

The search bar is your friend !!!!!!!!!!!!!!!!!!!!!!!!!!!!!



http://hondaf6b.com/showthread.php?466-E-C-Low-Beam-Cutout-Harness-Part-02116&highlight=02116

Ha, chill out Steve ;-) I read that thread before posting and it's all about installation. Installation of part# I can't find. If you'll re-read my OP and go to EC or SoCal's webpages, the part# 02116 is no where to be found anymore. Just the 02114 and only on EC's webpage. Does this P/N differ in compatibility from the -16?

I am very aware of the search function and I do try and use it before posting a new thread topic.

[98valk]

Ha, chill out Steve ;-) I read that thread before posting and it's all about installation. Installation of part# I can't find. If you'll re-read my OP and go to EC or SoCal's webpages, the part# 02116 is no where to be found anymore. Just the 02114 and only on EC's webpage. Does this P/N differ in compatibility from the -16?

I am very aware of the search function and I do try and use it before posting a new thread topic.

I don't remember the exact difference, but you do need the 02116 p/n. The 02114 isn't going to do it. The 16 uses an additional relay.

Someone appears to be in the process of making a new cutout to replace the 16. The p/n is GL12NC ("in stock soon", @ socal).

[Elroy]

I don't remember the exact difference, but you do need the 02116 p/n. The 02114 isn't going to do it. The 16 uses an additional relay.

Someone appears to be in the process of making a new cutout to replace the 16. The p/n is GL12NC ("in stock soon", @ socal).

Neato, thank you Valk. Glad I didn't order from EC then! I searched that p/n on SoCal's page and didn't turn up any results. But thanks, I'll keep an eye out for it! Maybe call them in the meantime.

Edit: what the heck, googled the new p/n and first result was SoCal's page. Lol. O well.

[98valk]

This is what I found googling it:

http://www.socalmotogear.com/product-p/gl12nc.htm

It doesn't help you get one today, but it's nice to know they have a plan ;) .

Oops, you found it. Yea, weird that google finds it, but not socal's site. :shrug:

[Steve 0080]

My Bad !!!
tel 865.219.9192$29.95

Not sure why but I am having trouble pulling up their URL They do have it in stock...give theme call....


Your 1800 shuts off the headlight when you press the starter button.
This process of cycling power is hard on both the bulb and especially an HID ballast. And the HID bulb.
This harness changes the trigger to your low beam relay so that the low beams only get power after the bike's engine is started.
Can be used to disable factory halogen headlight bulbs as well.

The directions I wrote up are better the E/C's....JMHO

[Elroy]

My Bad !!!
tel 865.219.9192$29.95

Not sure why but I am having trouble pulling up their URL They do have it in stock...give theme call....


Your 1800 shuts off the headlight when you press the starter button.
This process of cycling power is hard on both the bulb and especially an HID ballast. And the HID bulb.
This harness changes the trigger to your low beam relay so that the low beams only get power after the bike's engine is started.
Can be used to disable factory halogen headlight bulbs as well.

The directions I wrote up are better the E/C's....JMHO

Great news, thank you Steve! I planned on calling them eventually but nice to know ahead of time. And I'd already bookmarked your directions previously months ago. Thanks for the write-up.

[Steve 0080]

My pleasure !

[Elroy]

Ah-ha! If you go to the page for part#02114 on E/C's site, you can select "show options" and they have the right part (02116) in the options. Completely missed this yesterday, it WAS towards the end of the work day after all...
Now, I wonder why SoCal doesn't have it and is replacing it with a different part#/manufacturer.

Thanks Valk & Steve for your help.

[scoplin]

I installed one yesterday that I ordered from Cyclemax, EC02116.

[pdxstriper]

Hi
FWIW an inquiry via email to SoCal got this response:

http://cyclemax.com/inc/sdetail/gl1800_low_beam_cutout_harness/125827

Pete