PDA

View Full Version : unknown part



wjduke
06-20-2016, 06:50 AM
Ok guru's....I found this floating around in my right saddlebag over the weekend. Does anyone know if it's from the bike? I don't seem to be missing anything. I did the superbrite led's over the winter, but all seems secure. I know it's a bushing, but that's about it. It's a metal piece.

21628

Steve 0080
06-20-2016, 06:54 AM
Looks like the bushing for the saddle bag lid....pull up a pic of the parts for the lock on the saddle bags and see if you can see this one.

wjduke
06-20-2016, 06:56 AM
Looks like the bushing for the saddle bag lid....pull up a pic of the parts for the lock on the saddle bags and see if you can see this one.

I will...thanks

yellow rex
06-20-2016, 07:01 AM
The seat has one but I think it is a different color.

wjduke
06-20-2016, 07:25 AM
Could be part #2....will have to check that saddlebag after work, see if anything is loose. Thanks Steve.

Sorcerer
06-20-2016, 08:17 AM
That looks like where the studs come through into the saddle for rear light housing. If I remember, a cap nut on the stud.

wjduke
06-20-2016, 10:46 AM
That looks like where the studs come through into the saddle for rear light housing. If I remember, a cap nut on the stud.

The bike is parked, but I felt the cap nut on that side yesterday...it's there at least. Have to look around inside and out later today...thanks for the tip

Vondawg
06-20-2016, 12:20 PM
Hey....maybe it has something to do with that noise you had a few months ago in that area:jerkit:

wjduke
06-20-2016, 12:31 PM
Hey....maybe it has something to do with that noise you had a few months ago in that area:jerkit:

Na, took care of that...no noises with this, just rearranged things and found it.

Sorcerer
06-20-2016, 01:29 PM
The bike is parked, but I felt the cap nut on that side yesterday...it's there at least. Have to look around inside and out later today...thanks for the tip

You may have unknowingly push that part out of the rubber gromit that the tail light mounting stud goes through. You may have to remove the cap nuts to see which one it came off of.

BuzzzPhotos
06-20-2016, 01:30 PM
What was that noise?

wjduke
06-20-2016, 02:05 PM
What was that noise?

I posted it on that thread....I had a plastic bag with small allen wrench and little crap in it and it broke open. I never checked, not thinking I had anything in there like that...my own stupidity....quiet as a church mouse now.