PDA

View Full Version : Kick protectors



Sonny
10-09-2016, 12:29 PM
Has anyone bought a set of these? What do you think protection wise? I have picked up a couple of rock nicks and am thinking these will cover the damagenwhich isn't bad. Please post a pic or two if you have them.
http://www.revzilla.com/motorcycle/kuryakyn-front-saddlebag-kick-protectors-for-honda-goldwing-2012-2015

willtill
10-09-2016, 06:11 PM
IMHO you really don't not need those on the F6B

stroguy
10-09-2016, 06:34 PM
IMHO you really don't not need those on the F6B

Jeff? Can you confirm? Can you acknowledge?

willtill
10-09-2016, 06:47 PM
Jeff? Can you confirm? Can you acknowledge?

Not sure if you are "in the cups" or what... :icon_lol: but a big "negative" here

BIGLRY
10-10-2016, 01:20 PM
No experience with them, but interesting and if I start to see a problem in that front area of my bags they might be something to look into.:icon_biggrin:
http://images1.revzilla.com/product_images/0151/6745/kuryakyn_front_saddlebag_kick_protectors_for_honda _gold_wing20122015_chrome_detail.jpg

Sonny
10-10-2016, 03:35 PM
About a week ago i rode through some road work that sucked, they had just layed chipped limestone. I think thats when i picked up the scars.

Steve 0080
10-10-2016, 06:32 PM
No marks on mine at the 33K mark !!!

Ixol Phaane
10-10-2016, 07:18 PM
If you don't get marks on the saddlebags, then you'll get 'em on the front fender and the nose of the fairing.
Just RIDE the thing! :icon_biggrin:




48549 and counting.

bubbasparks
10-10-2016, 07:54 PM
My buddy is going to use the same stuff they use on cars aka/looks like clear shrink wrap on his kawi Vaquero. I don't know how it would look on the flat bikes

zeus661
10-13-2016, 06:39 AM
My buddy is going to use the same stuff they use on cars aka/looks like clear shrink wrap on his kawi Vaquero. I don't know how it would look on the flat bikes

I think what you are talking about is what I put across the top of my gas cap cover. I noticed the glove box lid rubs against the gas cap cover when opening. It was getting scuffed so I put a strip of the clear plastic stuff about an inch wide across the top edge. Can hardly notice it.