NAHD
10-30-2016, 09:11 PM
Had this Bestem box sitting around that I bought a few years ago for a scooter. Finally put it on something.
Got some 8mm x 1.25 short pieces of metric all thread, nuts, washers and put em here.
http://hondaf6b.com/attachment.php?attachmentid=24320&d=1477877995
Took some black rubber hose cut it to length, slit it long ways and put em here
http://hondaf6b.com/attachment.php?attachmentid=24321&d=1477878135
Made an improvised adapter out of some 3/8th" plywood and plasti dip sprayed it
http://hondaf6b.com/attachment.php?attachmentid=24323&d=1477878416
Used some 1/4 x 20 bolts, nuts, and washers to attach Bestem quick release plate
http://hondaf6b.com/attachment.php?attachmentid=24324&d=1477878681
Front view
http://hondaf6b.com/attachment.php?attachmentid=24325&d=1477878809
Rear view
http://hondaf6b.com/attachment.php?attachmentid=24326&d=1477878903
Rear view,. Antenna does touch box and bend but just a tad
http://hondaf6b.com/attachment.php?attachmentid=24327&d=1477878977
It's an older 969.with brake but no running lights as lower strip is just a reflector. You can get one with all the lighty lights on eBay for less the a buck. I will probably replace the plywood with a piece of aluminum plate. And the rest of that can of plasti dip.
Got some 8mm x 1.25 short pieces of metric all thread, nuts, washers and put em here.
http://hondaf6b.com/attachment.php?attachmentid=24320&d=1477877995
Took some black rubber hose cut it to length, slit it long ways and put em here
http://hondaf6b.com/attachment.php?attachmentid=24321&d=1477878135
Made an improvised adapter out of some 3/8th" plywood and plasti dip sprayed it
http://hondaf6b.com/attachment.php?attachmentid=24323&d=1477878416
Used some 1/4 x 20 bolts, nuts, and washers to attach Bestem quick release plate
http://hondaf6b.com/attachment.php?attachmentid=24324&d=1477878681
Front view
http://hondaf6b.com/attachment.php?attachmentid=24325&d=1477878809
Rear view
http://hondaf6b.com/attachment.php?attachmentid=24326&d=1477878903
Rear view,. Antenna does touch box and bend but just a tad
http://hondaf6b.com/attachment.php?attachmentid=24327&d=1477878977
It's an older 969.with brake but no running lights as lower strip is just a reflector. You can get one with all the lighty lights on eBay for less the a buck. I will probably replace the plywood with a piece of aluminum plate. And the rest of that can of plasti dip.