Don't forget the BRP!!!
Printable View
Installed a set of Helibars on my 6 . Difference is night and day. Still some tweaking to get them perfect but well worth it. Took me about 4 hours taking breaks and going slowly."coffee"
It is from Wingstuff and it does fit the F6B. If you have the Deluxe model F6B it is plug and play, as long as you buy the accessory cable splitter that connects under the left side of the fairing (under the left storage box). You have to route the cable over to the right and then you can plug it in. Wingstuff has that cable as well...
http://wingstuff.com/products/29328-...essory-harness
I believe that if you do not have the Deluxe model, you can connect directly to the connector on the right side that would be normally used by the heated grips switch.
You also can not see this in my pictures that you found, but when you are installing that Voltmeter, you will see that the threaded positive terminal on the back of it comes dangerously close to contacting the radiator. So just get one of those wire terminal connection twist plugs (the kind you use when your're connecting house wires together) and twist it on to the threaded terminal in order to keep it insulated from the radiator.
Very helpful.
Not today, but last weekend my son and I rode our motorcycles to a campground located in Winona, MN along the Mississippi river. It was my first motorcycle camping trip in over 25 years and my son's first one ever.
https://s20.postimg.cc/dbf3utxal/20180909_111359.jpg
https://s20.postimg.cc/3lrpy0dfh/image.jpg
Left her alone while I painted the inside of her new trailer.
5X10 v nose with ramp and side door.
Can start screwing down e track and front chock.
Most of the next upgrades will be in the trailer.
Will use it as camper when bike is out side under canopy.