Originally Posted by
Delta
Hey Grant, thanks for your help on this. My triple play arrived in todays mail, still waiting on the LEDs and the no load flasher will not be ready till 4/4. Anyway, I did manage to get the triple play installed and I took power from the accessory slot of the fuse box. There isn't a whole lot of room when splicing up the wires with the posi-locs. It works using the incandescent lights but blinks fast without the required flasher. I programmed it, bolted the light assembly back on, took the bike off the stand, checked my work; and, only the center running light was on. No brake light, directional back to normal speed but one side blinking bright while the other blinking dim. So a phone call to Custom Dynamic. Answered a lot of questions then I was told tech support would call me back in 30 minutes.
In the meantime I wired up my GPS to the accessory slot on the fuse box and just for kicks pulled that fuse. Damn fuse was blown. Changed the fuse and the triple play starts working again. Tomorrow I'll tape over all the posi-locs so that when I reinstall the rear lights nothing shorts out. I didn't see any bare wires but that's the only way to blow a fuse, right? What else might cause this?
Anyways, it's a load off my mind to have adequate lighting rear lighting. Nice mod Grant, thanks again.