Printable View
Does anyone have the newer Honda and if so, how does the paint and plastic hold up? Every time I detail my B I can’t believe how crappy the paint and plastics are on this bike. The biggest disappointment for me besides having to remove 80% of it to get to anything.
My red 2013 would turn the rags pink. But the paint on my 2016 matte white is holding up very well. I've never had any issues with the plastic panels.
I’ve got a 16 matte grey and I had a protective coating put on it but the paint seems to chip off easy. I’m super anal retentive but it literally looks like they shot 1 super thin coat and called it good.Quote:
Originally Posted by F6Dave
That's interesting. I assumed you had one of the 2013 models with the 'soft' water based paint and no clear coat. I was very careful not to scratch my red 2013, and used the ridiculously expensive Liquid Glass to keep it looking good. My matte white 2016 still looks great, with only a few stone chips but no problems with the paint quality.
As for plastic quality, I've had 5 Honda motorcycles and the only problem has been 2 hairline cracks in the fairing of my 1999 Valkyrie Interstate. The Valkries were wonderful bikes but the Interstate seemed to be rushed to market. The fairing and trunk are prone to rattle, and the audio system is weak. However the wind protection is great and there is vastly more storage capacity than the F6B. And in it's day the Valkyrie easily outperformed any cruiser on the market.
I’m on my second front fender and lower cowl due to tabs cracking off. I had the cowl shot with rhino liner type stuff and it holds up well. The plastics on the bike just seem soft and where I have chips in paint it looks super thin.Quote:
Originally Posted by F6Dave
That's unbelievable. Did you get anything covered by Honda? Has anyone else reading this had those issues?Quote:
Originally Posted by Ewreck
My 14 yellow F6B paint is shinny nice. :cool: When washing I have no yellow bleeding on the rag or in the bucket of water. My plastic is holding up well but she has less than 20k on her. I've replaced the seat and shield since I've owned her and we have a great relationship. :o
As I recall, there were lots of early reports of paint issues on these bikes. There were several threads here at one point, but I think many of earlier posts on the forum were lost to the aether at one point due to an issue with the site.
In 2013 and 2014, the black was super soft and scratched very easily, and I've read lots of folks complain of the 2013 red coming off on polishing cloths. Prior to buying my 2014 new, I knew of two black 2013s locally where the owners were quite unhappy with it, so I was wary of it. The folks at Honda of Russellville (Arkansas) agreed to blow mine apart and paint it for me (Honda Candy Red, a full Wing color) prior to me flying in to pick it up. I've been quite happy with that paint, but it's not perfect by any means.
What are the problems with their paint? Is it a paint quality problem, or a problem with their workmanship?Quote:
Originally Posted by rdbonds
They basically blew me off so I just handled it. There was a thread going on about the paint issues and I believe a few people had broke tabs in various ways.Quote:
Originally Posted by F6Dave
I truly believe it’s a combination of both sub par plastics and paint. I was checking out the BMWs and their product looks/feels superior. My 2006 Street Glide paint has held up way better than my Honda. It’s why I asked if Honda improved their quality on the new bike.Quote:
Originally Posted by F6Dave
Nothing significant, sir. There is a bit more orange peel in spots than typical factory paint jobs, and there is one spot where the coverage appears a little thin. That said, it's tough as nails with only one tiny chip over the 7 years I've owned the bike, so as compared to the factory soft paint issues that others have reported, I'm quite happy. Given the chance, I'd do the same all over again. Apologies if I made it seem like I was unhappy with it.Quote:
Originally Posted by F6Dave
Given that it's clear-coated, I suppose I could use rubbing compound to cut the orange peel, but it's never bothered me bad enough to bother. :)
I bought a 2013 black F6B new and yes the paint was very soft.Quote:
Originally Posted by rdbonds
I tried different waxes and I had great results with glare I used the Winners Circle Pro Kit it’s not cheap but it was money well spent.
No more scratches or marks. It will last for years. I did the 4 step process two times in 7 years, maybe once I year I will wax it with glare polish
Here’s the website and description for me it was wirth the money
https://www.glare.com/
NEW GLARE + Winners Circle Pro Kit - Special Pricing! Save $39.81, If Purchased Separately $134.80. All for $94.99 + LIMTIED TIME FREE SHIPPING USA ONLY!
This kit includes one of each: The New GLARE+ Now with more Glassplexin more Protection. Contains GLARE Professional Polish,GLARE,Micro-Finish, GLARE Spider and GLARE Knock-Out Compound! This kit is the very best for new, and used Vehicles!!! Restores all painted surfaces. Great for Clear Coated Paints. UV Protection. Ultimate High Def. Gloss, and Shine! The very finest money can buy! Nothing like it. Beyond 22nd Century Technology!
My 2013 black has no clear coat. And yes it scratches easily.
I had a body shop go over it and polish the scratches out.
One washing later they were back.
You said you were super careful so I'm assuming you don't store outside, Ewreck?
I've had good luck using ducky matte on the paint and Meguires on all the plastics and everything looks pretty much new on my '16 matte silver.
Jason
You should try Glare it worked for meQuote:
Originally Posted by tenxxx
Bikes garaged with cover. I’m not complaining about fading or plastics turning color it’s all the small nicks/bumps and minor chipping that bugs me. I had a ceramic coating applied when I first purchased and also use Ducky for basic cleanup so as far as color, it’s fine.Quote:
Originally Posted by Verismo
I gotcha, Ewreck. That would drive me nuts, too. Fwiw, I used color rite matching to paint the top case, and I really liked the matching. They sell a touch up pen, too. I haven't tried it, but if I get a chip,I might give it a shot.Quote:
Originally Posted by Ewreck
Jason