GL1800 Tunnel Filters

Printable View

08-26-2016, 12:56 PM
bob109

2 Attachment(s)

GL1800 Tunnel Filters

Anyone using the GL1800 Tunnel Filters on their F6B? Found them on Amazon by accident! Not sure if they would have a impact on the overall cooling! There are several sources for them with prices as low as $15.00 per set!

Here's a pic!

Attachment 23006

They supposedly help eliminate "buffeting" and cut down on bugs:shock:
08-26-2016, 01:07 PM
Chas

I got them, installed them and then removed them and tossed in garbage. I did not like the fact that they would become dislodged and then have to reset them. Not worth the price or annoyance.
08-26-2016, 01:10 PM
bob109

Quote:

Originally Posted by Chas

I got them, installed them and then removed them and tossed in garbage. I did not like the fact that they would become dislodged and then have to reset them. Not worth the price or annoyance.

Thanks for the quick feedback! You just saved me $15.00.:039:
08-26-2016, 03:14 PM
DMAGOLDRDR

2 Attachment(s)

Bob,,,, I made a set myself and even in this heat I have no temp issues. I have noticed a big difference in air passing my face which is the reason why I keep them.

For what it is worth..........
To give you an idea why I care about wind in my face you only need to look at my beard. Pictured here with my daughters a year or so ago (it's a bit longer now)
Without the tunnel fillers the wind would come up from around the bars and push my beard in my face at highway speeds. A bit annoying to say the least !!!! With the tunnel fillers it stays down and no problem.
08-26-2016, 03:33 PM
DMAGOLDRDR

Quote:

Originally Posted by DMAGOLDRDR

Bob,,,, I made a set myself and even in this heat I have no temp issues. I have noticed a big difference in air passing my face which is the reason why I keep them.

For what it is worth..........
To give you an idea why I care about wind in my face you only need to look at my beard. Pictured here with my daughters a year or so ago (it's a bit longer now)
Without the tunnel fillers the wind would come up from around the bars and push my beard in my face at highway speeds. A bit annoying to say the least !!!! With the tunnel fillers it stays down and no problem.

P.S. when I made mine I stacked multiple layers if 2" foam and glued them together. They have been in for a year or so now.
If the link works it will show you the dimensions to cut your own thanks to Steve Saunders.
http://www.goldwingfacts.com/Gifs/1800tunnelfillers.jpg
08-26-2016, 04:41 PM
98valk

I have a set and had them in for over a year without a problem. I removed them recently to install LED headlights.

They are also supposed to help block some road noise. I give them a thumbs up. :yes:
08-26-2016, 05:40 PM
Switchmonkey

I'm not picturing in my head where exactly these things go...

Pics?
08-26-2016, 05:47 PM
Wing'n it

Quote:

Originally Posted by Switchmonkey

I'm not picturing in my head where exactly these things go...

Pics?

They are actually called "tunnel fillers" and they fill the open void where the forks are.
08-26-2016, 07:56 PM
bob109

+ Feedback

Thanks everyone for the feedback. As I like concocting improvements for the 6, I see myself getting some high density foam and making a set. Nothing ventured, nothing gained:icon_wink:

Thanks again to DMAGOLDRDR for the blue print/sketch:039:
08-26-2016, 07:58 PM
Buckeye_F6B

If it rains wouldn't it act as an... umm sponge ? :)
08-29-2016, 06:37 AM
DMAGOLDRDR

Quote:

Originally Posted by Buckeye_F6B

If it rains wouldn't it act as an... umm sponge ? :)

A bit maybe but not that much rain gets up in there. When riding in the rain, you don't see any come up through the tunnels.
08-29-2016, 07:04 AM
choptop

I ordered a set, trip to Russellville will be a good test. On roads w/a lot of small sand like debris I can get hit by a lot of it coming up the tunnel.
08-29-2016, 07:30 AM
bob109

Quote:

Originally Posted by choptop

I ordered a set, trip to Russellville will be a good test. On roads w/a lot of small sand like debris I can get hit by a lot of it coming up the tunnel.

Looking forward to your feedback on how the tunnel filters work:icon_wink:
08-29-2016, 07:37 AM
willtill

Think I am going to try these. There is a lot of noise that comes up from the fork well. If these cut it down... then it's worth it. :yes:
08-29-2016, 11:49 AM
Circle-5

For those who don't already know this – the best way to cut sheet foam quickly and accurately is with an electric kitchen knife (the common, split-blade type).
08-29-2016, 12:02 PM
willtill

Quote:

Originally Posted by Circle-5

For those who don't already know this – the best way to cut sheet foam quickly and accurately is with an electric kitchen knife (the common, split-blade type).

That's helpful. I was wondering what to use... now need to find some closed cell memory foam.
08-29-2016, 06:23 PM
shortleg0521

Quote:

Originally Posted by willtill

That's helpful. I was wondering what to use... now need to find some closed cell memory foam.

Bed,bath, beyond has it.
08-29-2016, 06:30 PM
choptop

Quote:

Originally Posted by shortleg0521

Bed,bath, beyond has it.

He's not looking for a comforter or shower curtain Shortleg.:icon_lol:
08-29-2016, 07:04 PM
willtill

Ha! :icon_lol:

I'll go there and look anyway :icon_wink: ...may find my feminine side :shock:
08-29-2016, 07:25 PM
Beau1502

Thanks

Quote:

Originally Posted by DMAGOLDRDR

P.S. when I made mine I stacked multiple layers if 2" foam and glued them together. They have been in for a year or so now.
If the link works it will show you the dimensions to cut your own thanks to Steve Saunders.
http://www.goldwingfacts.com/Gifs/1800tunnelfillers.jpg

Thanks for comments and diagram.
10-27-2016, 11:03 PM
jeffedose

gl1800

I've had them in my full wing for over a year..I like them but they can be a pain in the ass when they do become dislodged or squished after removal for front end work....overall worth the 15$ they stop a lot of crap from coming up the tunnel.....