If leaning past where the pucks grind this is apparently the next place to touch. Wish this bike was a little taller.
http://i45.photobucket.com/albums/f9...psjqn4lczh.jpg
Printable View
If leaning past where the pucks grind this is apparently the next place to touch. Wish this bike was a little taller.
http://i45.photobucket.com/albums/f9...psjqn4lczh.jpg
Traxxion is the fix for that. The pavement will turn you foot pegs into stilettos, and then wear into your front crash bars before grinding away at the exhaust shields.
:shhh:
Yes, both sides on my bike have the same road tattoos. :icon_mrgreen:
now that's what I call getting the most out of your tires. WOW no nubbies left on the sidewalls when its time to replace is something to be proud of in my book. Round-abouts at 30 mph anyone?
One good thing about the new wings is it will not have those to scrape.Quote:
Originally Posted by 2wheelsforme
I've repainted the heat shields twice now. I replaced my belly pan after these pics were taken. dragged holes in the corners. I upgraded my suspension last winter. Still touch down occasionally, but much less often :icon_cool:
https://i.imgur.com/qKYM2UB.jpg
https://i.imgur.com/ciOwxuL.jpg
https://i.imgur.com/Bx43hxC.jpg
Do the pegs hit before the parts shown above?
Normally yes. Usually the heat shield gets it when coming into a corner hard and the suspension is compressed . Especially with a dip in the corner.Quote:
Originally Posted by VStarRider
Pegs are "usually" the first thing.
Pavement 'hills' & 'valleys' during a good lean will cause other things to scrape first.
I've replaced my peg bolts twice now.
My belly pan was repainted twice before the side ripped off and took out one of the acorn nuts holding it in place.
Heat shields repainted once.
Plastics all scuffed up.
Underside of pipes - I don't even look anymore.
Since Traxxion suspension upgrade, I've had to really work at finding some hills and valleys to scrape anything but the footpegs.
Advanced rider tip: keeping "maintenance throttle" during the entirety of a turn will keep the suspension set and rear tire loaded, resulting in less things scraping.
Cheers,
Steve
I need to up my game. I don't get to scrape my pegs hardly at all...Officer friendly frowns upon it mightily when I do it rounding the Gorst corner :icon_mrgreen:
Am liking my recent Traxxion front end work. I'm still scraping; but not as much as before.
I hate scraping.
15,000 miles and I have only scraped a peg once.
I'm just under 10k and I've scraped maybe three times and the last was after I put on my highway pegs and was experimenting.Quote:
Originally Posted by VStarRider
Ah you guys make me feel better! Had the bike 4 months, only scrape the pegs on rare occasions. Glad I'm not the only wimp😀!
It definitely is how you ride this bike. :icon_wink: each one to their own style. Ride your own bike.Quote:
Originally Posted by Heatnbeat
:icon_cool: