6 Attachment(s)
Tom Tom Rider GPS hardwire install
Hi Mike. I recently purchased a Tom Tom Rider. It came with RAM mounting hardware and a power cable. As you can see from the attached pic's, I attached the GPS to the clutch reservoir and ran the power cable through the conduit on the handle bar down out towards the front of the bike and then back into the left cubby through the cable grommet. There is an available connector that offers the same 12v aux socket connector that I used to connect the power cable to the GPS to.
It works perfect. You turn the bike on and it powers the GPS.Attachment 19384Attachment 19385Attachment 19386