Rear brake and turn switchbacks

https://rover.ebay.com/rover/0/0/0?m...2F232619335917

Anyone tried these?

I have not used those blubs, but have some like them doing brake and signals

You will need to get some "y" adapters or splice in to your current wiring to work as advertised.

Easiest way is replace the lamp sockets with double contact.
That way you just need to run a brake wire.
look on you tube for info, one of the ladies here put up the info.

I thought there was a bulb swap, using the OEM sockets...………….. Check LED run, turn, brake bulbs on ebay

I did the mod per the video.
Actually I ran them first as red running lights - on all the time - but my brake light effectiveness was diminished.
So I went back to her configuration where there is no light except for when signaling and braking.
Much betterer.
Cheers,
Steve

Quote:

---

Originally Posted by 53driver

I did the mod per the video.
Actually I ran them first as red running lights - on all the time - but my brake light effectiveness was diminished.
So I went back to her configuration where there is no light except for when signaling and braking.
Much betterer.
Cheers,
Steve

---

I did the same. Brakes lights are bright