Printable View
Tinkering with the F6B getting it ready for some spring riding.
One of the things I want to bring along is a small camera and I chose an older model go pro 5 hero black. I connected the OEM go pro (duo) battery charger to the rear saddlebag USB where I usually plug in my music memory stick, and discovered it will power the battery charger and charge the camera batteries while the engine is running. Nice surprise to me.
Just thought I'd pass that along.
Happy trails in 20/20.
I was looking into adding a cigarette lighter socket to the left saddle bag, ince the battery and accessory posts are on that side.
I want to connect a portable jump starter directly to the battery so it's always charged for use. My unit has two USB connections which would work for charging many devices.
Before you drill let me check to see if my pocket jumpstarter will charge off the OEM USB..
UPDATE
I can report that the OEM USB port in the left saddlebag will charge a WinPlus jumpstarter rated at 8000 mAh (3.7v) 2700 mAh (12v)
I can't tell what the charge rate will be but I imagine it'll at least keep a device topped up while driving.
I hope this helps somewhat.
Happy trails..
Yes the USB in saddlebag will charge anything chargeable with a USB port. Those jumpstarters will hold a charge for months so seldom do they need a recharge unless used. You do not want to leave it hooked to battery all the time. I did add some false leads coming off the battery so it is easy to hook up a charger but as long as you can get to the battery you should have no problem.
I'm not sure what "false leads" are...But if it's a Battery Tender connector at the end of two leads coming directly from the battery, I guess the trickle charge of one of these devices could run the battery down if the bikes sitting for a week or more.Quote:
Originally Posted by 2wheelsforme
I'm talking about connecting my "leads" to the auxiliary connections in the fuse box, just ahead of the battery. The auxiliary connections are switched by the key so a 12V lighter outlet gives me all kinds of connection options but only when the bikes running. On a "longer than one day" trip, I can keep the jumpstarter fully charge AND connect two other USB devices to the Jumpstarters USB connections.
Attachment 7217
I use the auxiliary saddle bag USB for my music USB drive, and I'm NOT giving up my music. (lol) I could connect a USB hub but don't imagine the USB 5VDC has enough current to drive too many devices at once.
The ratings you're using here are the WinPlus Jumpstart's battery OUTPUT. The input is the standard USB 5VDC, with the higher than "normal" current of 2 Amps maximum. Once fully charged the Jumpstart should use less current to "trickle" charge, and I agree, the bike's alternator can FULL or trickle charge these devices while the engine is running.Quote:
Originally Posted by unsub
I only put those specs out there for product identification.Quote:
Originally Posted by SeaSteve
I used the thumb drive for music until I started using my GPS with a micro sd slot, but I understand not everybody uses a dedicated GPS..
Let us know how how your project works out when you're done.
Happy trails.
I think I'll tackle it this weekend. I'll post some pictures of the "path" I find into the saddlebag.
I usually charge my go pro with the cable connected to the charger accessory in the cubby. I have a dual usb plug connector so I can charge my phone and the camera when I use it. Since I usually place my gopro on top of the left mirror or with a holder placed at the base of the windshield is convenient to charge it with the usb in the cubby.
:yes:Quote:
Originally Posted by perohijo