Originally Posted by
DarkKnt
I think we're talking about different circumstances. If I'm anticipating a stop, I simply roll off the gas and start braking. As the bike slows and rpm drops, I pull in the clutch and tap down through the gears to arrive in neutral as I pull up to the stop. I'm not downshifting technically, as I'm not releasing the clutch to engage the gears as I slow. This is not my most used technique, because generally, I'm trying not to come to a complete stop. I'm selecting a lower gear in anticipation of accelerating again. So generally, I'm braking, then selecting a lower gear and releasing the clutch. This typically requires raising the rpm to match engine to road speed in the lower gear. To do this I use the throttle to raise the rpm (the blip), and then let out the clutch. I'm now in a lower gear, at a higher rpm, and ready to accelerate - out of the corner, or away from the light, or past the car - whatever...