I need the bike to be higher, because it touches a bit
How do I adjust the shock for height
Which way do I turn it
Clockwise or Anti clockwise:cool:
Printable View
I need the bike to be higher, because it touches a bit
How do I adjust the shock for height
Which way do I turn it
Clockwise or Anti clockwise:cool:
I believe clockwise makes it stiffer, so counter clockwise.
This is one of the very few flaws that I don't like about the F6B. She scrapes pegs way too much in hard corners.
Running a car tire has mitigated a little bit of that though.
ReserveBum - I believe that if K2157 wants the rear higher, he needs to go clockwise (stiffer). Since the knob is simply a preload adjustment, if he goes the other way, it'll lessen the preload on the bike and drop the rear further.
K2157 - I agree with you and willtill that the bike does touch down fairly easily due to the low stance. If you are not already doing so, one thing that can help is leaning your body further into the turn, which shifts the over center of gravity inward, allowing the bike to remain more upright in the turn, and tightening the corner. I'm not talking about a Moto GP style hanging off the inside of the bike dragging a knee, of course...but simply having your chin aligned with the mounting point of your inside mirror will dramatically tighten a curve on the old gal.
Kind Regards
+1.. that does help a lot and how ride. I also have drop foot peg mounts so my scoot has even more clearance issues.Quote:
Originally Posted by rdbonds
As long as the subject of preload is up:
On my rear shock adjuster, starting from "0", It takes 7 or 8 clicks before I feel any resistance.
This does not hurt me, because I am a light weight. But for some of you and those who want/need more clearance, this might be important.
On the full wing, there is a procedure to fill up the shock pump to get rid of the slack. I wonder if we can add fluid to our systems to take out this slack?
Thoughts??
I have switched to the 'Valkyrie' rear tire. I use Bridgestone Tire G702 180/70R16 vs the 60R16 that is stock. It gives a bit more clearance. I've been using this for 15 years on my old '03 1800 and now on my B.
That is a known problem for sure. The fix is to replace the rubber hose with a braided hose that doesn't expand. https://wingstuff.com/products/29049...re-loader-lineQuote:
Originally Posted by 98valk
I have one (Valkyrie size) mounted on my spare rim. I'm looking forward to trying it out, but still have some miles left on the current rear.Quote:
Originally Posted by TheWalrus
Interesting:Quote:
Originally Posted by TheWalrus
https://i.postimg.cc/dVvzzYLS/Capture.jpg
All those odometer miles that could have been shaved by a Valk tire...
Agreed. With the Valk tire the reading is more accurate. At least it was on my Wing and B. Using my GPS with the 60 series it was always reading high by about 9%. i.e. on the highway the speedo would read 65 and the GPS would show 59-60. So then the odo would show more miles that true.Quote:
Originally Posted by Switchmonkey
With the 70 series the speedo and GPS are in agreement.