Quote Originally Posted by Verismo View Post
Hey I've been curious about this. I have been thinking about moving my seat back a couple of inches or so and thought I might add the MBL risers under my Helibars to compensate. However, I have mine set in nearly the lowest position and the throttle cable is already quite taut. I'm not sure I'll have enough slack to put them in their lowest position if I move them back farther.

Have you checked yours to see if you have the full range of positions since the risers?

Jason
My throttle cables are pretty tight as it is. I adjusted those 90 degree bends at the handlebar to make the cables more loose. I am probably using 99% of the available length. I guess I got lucky that it all works.

Lowering the bars might still be okay. It looks like the distance could be even a bit shorter then (vs up higher). But, the cables might then be touching your brake lever (mine are close). Bottom line is that it is going to be close, but you can probably make it work.