Originally Posted by
Miles
The 960's...whether the Dual 960's or the Single 960's, both from BikeMP3, are basically plug n' play. They connect into the OEM wiring harness that is located down mon the front of the engine, at the same connectors that you would plug in a set of Honda fog lights. Then...the switch of yuour choice would be installed on the left side audio panel, where there are three blanks located there. Most of us choose to use one of the two lower blanks. That switch wiring is then routed to a connector that is in behind the audio panel, and it too is basicaly plug n' play.
There are no wires to cut, nothing to splice, and all is very sanitary when done.
"IF" you choose to go for the 960's from BikeMP3, decide if you want the Duals, or the Singles (that is two per side, or one per side), and also decide "which" switch you want. Many of us have found that the OEM Honda fog light switch is not our choice for the best switch. We have been there...done that, and the problem with the OEM Honda fog light switch is that the small LED light on the switch is ON 100% of the time when the bike is on, whether the fog lights are on...or not. Many have changed over to the Electrical Connection fog light switch, as that Green LED light is on...only when the fog lights are on. Check with Pete at BikeMP3 and ask if he too has a switch like that...other than the Honda switch.