Technical advice - Page 2
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Technical advice

  1. #11
    Senior Member 98valk's Avatar
    Join Date
    Jun 2013
    Location
    Albq, NM
    Posts
    785
    Quote Originally Posted by okf6b View Post
    The stock OEM backrest stay lists at under $12. I'd just order it from my local Honda dealer. Putting it back to stock is easy. To remove the back cover, just remove the 2 5mm hex bolts on the bottom and pop the top tabs straight back. Swap the bracket using existing bolts. The stock bracket is laying by itself on the right.

    Attachment 6246

    Attachment 6247
    That's a useful picture! If the OP wants, he could cut the top off the extension, drill 2 new holes and have an almost stock height. Or drill 4 holes if he wants it shorter yet.
    Albuquerque, NM

  2. #12
    Senior Member okf6b's Avatar
    Join Date
    Mar 2015
    Location
    Oklahoma City, OK
    Posts
    205
    Quote Originally Posted by 98valk View Post
    That's a useful picture! If the OP wants, he could cut the top off the extension, drill 2 new holes and have an almost stock height. Or drill 4 holes if he wants it shorter yet.
    That's a lot of work for $12. I'm a lazy SOB.

  3. #13
    Senior Member 98valk's Avatar
    Join Date
    Jun 2013
    Location
    Albq, NM
    Posts
    785
    Quote Originally Posted by okf6b View Post
    That's a lot of work for $12. I'm a lazy SOB.
    I agree with you on that. Unfortunately, I am too impatient to wait. If I can just get it done in 30 minutes and be done, that's what I usually do. To make things worse, I would probably drag it out and make it an hour or more.
    Albuquerque, NM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •