Bike wash question
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Bike wash question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Sep 2015
    Location
    Harrisonburg, Va
    Posts
    140

    Bike wash question

    Alright, so its that time of year again for some of us. And I have a very important question.

    How the hell do you clean the bugs without damaging the matte paint?

    I havnt damaged anything yet, but after riding last evening, the front is covered. There has to be something out there that loosens it all so that I dont have to scrub too hard.

    Thoughts?

  2. #2
    Senior Member F6Dave's Avatar
    Join Date
    Nov 2014
    Location
    Elizabeth, Colorado
    Posts
    920
    I've noticed the same thing. My front fender is getting pretty dirty on the sides. With glossy paint I'd be aggressively cleaning but I'm not sure how to clean the matte white.

  3. #3
    Member
    Join Date
    Feb 2019
    Location
    NC
    Posts
    29
    Soaking affected areas with warm wet towels works well for bug removal.
    For routine bike washes I use Chemical Guys matte paint wash. Just a few drops in a bucket is all that's needed

  4. #4
    Senior Member
    Join Date
    Jul 2017
    Location
    Texas
    Posts
    417
    I have a Matte B. My method is to drench the matte parts in warm water, then lay a warm soaking wet micro fiber towel over the front parts and let that soak for a while. Come back, rinse the towel, soak it again, then very gently dab the bugs away from a small area to make sure they, too, are soaking wet and come right off. You can even use the headlights as a test area. As long as the bugs are sufficiently soaked, then they come away without scratching. I dab more than wipe the first time around. Once they're all gone, then I use a second wet microfiber to wipe down and clean. Doesn't take long to air dry, then another microfiber to apply Ducky Matte finish detailer.

    All sounds longer than it takes. I've done this plenty of times and so far no swirls or scratches.

    Jason

  5. #5
    Senior Member Bighutch14's Avatar
    Join Date
    May 2016
    Location
    Union Grove, WI
    Posts
    226
    Hydrogen peroxide works very well.

  6. #6
    Senior Member
    Join Date
    Oct 2014
    Location
    Leander, Texas
    Posts
    598
    Dr. Beasley's matte paint kit...

  7. #7
    Senior Member
    Join Date
    May 2017
    Location
    CO
    Posts
    654
    Let it soak. Ducky works good too. I had Flight Shield applied to my matte finish when I purchased the bike and the bugs come off easy. To bad they don’t make a product to fix the crappy plastic and paint.

  8. #8
    Senior Member P.Sutton's Avatar
    Join Date
    Mar 2016
    Location
    Northeastern Ohio
    Posts
    146
    Like some have said, soak time is what helps the most. I will use an aerosol foaming glass cleaner sometimes and let it soak, then re-coat, soak, etc. before a wash. I have started using a quick detailer spray after and between washes, and it seems the bugs don’t stick as bad. It is also matte paint safe.

  9. #9
    Senior Member
    Join Date
    Oct 2014
    Location
    Leander, Texas
    Posts
    598
    Soaking? Seriously? Buy the Dr. Beasley kit, and you'll have enough product to last for years... It comes with a smaller spray bottle of the Paint Cleanser, which you spray on, wait maybe 15 seconds, and wipe the bugs/tar right off. Or, you can just buy the larger size bottle of the cleanser:

    https://www.drbeasleys.com/matte-paint-cleanser.html

  10. #10
    Senior Member shortleg0521's Avatar
    Join Date
    Sep 2014
    Location
    fredrick. maryland
    Posts
    1,216
    Dr Beasley,s and hydrogen poroxide are both your friends.
    When I travel I have spray bottle half and half with water and hydrogen poroxide for bugs.
    What it will do is lift the bug guts loose.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •