In helmet audio
Results 1 to 10 of 20

Thread: In helmet audio

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    May 2019
    Location
    Alabama
    Posts
    42
    I’ve been riding with a Sena 10s playing music on every type of bike imaginable for close to 5 years. Amazing product imo.

  2. #2
    Member
    Join Date
    Jul 2019
    Location
    Twin Cities
    Posts
    48
    I have to ask because I'm not sure the answer. I have a Bluetooth connection from Electical Connections. That allows me to send music via Bluetooth on my phone to my stereo on the bike to be played thru the speakers.

    So, question is, can that Bluetooth on my bike send the stereo music and intercom wirelessly to my helmet/Sena from the bike??

    I also have a Bluetooth on my Garmin GPS but I've never tried it. I'm usually very interested in techy/electronic kind of stuff so my knowledge is lacking in this area.
    The stoichiometric mixture for a gasoline engine is the ideal ratio of air to fuel that burns all fuel with no excess air. For gasoline fuel, the
    stoichiometric air–fuel mixture is about 14.7:1 i.e. for every one gram of fuel, 14.7 grams of air are required. - Wiki

  3. #3
    Senior Member shortleg0521's Avatar
    Join Date
    Sep 2014
    Location
    fredrick. maryland
    Posts
    1,216
    What I use is a bit pricy,
    1 Sena sm 10 plugged into headset jack with 3.5 to 5 pin din.
    2 Sena 20s headset
    3 Garmin zumo 396.
    With this setup I can listen to any sorce on bike.
    I can listen to music on phone, also make and receive calls.
    When gps gives directions it will cut off music and give directions.

  4. #4
    Member
    Join Date
    Jul 2018
    Location
    Valley Springs, CA
    Posts
    63
    I have the Sena10 head set and listen to music while I ride. I have Serius XM hooked into the F6B audio system so that I can listen to 60's and 70's tunes. What I found is that the Sena helmet speakers were not close enough to my ears, because of the helmet padding, so I get some double sided 1/4 inch thick material and cut it to fit and attached it behind my helmet speakers. It made a big difference and now I use much less volume and get better quality sound.

  5. #5
    Junior Member
    Join Date
    Dec 2021
    Location
    Pittsburgh, PA
    Posts
    17
    wondering if you got this working? I am looking at this as I have the electrical connection bluetooth and just got a sena 50s.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •