torque loops and belly pan

[BIGLRY]

No problem...I have both, a ss belly pan and Loops... there is NO issues as the Loops actually take less room than the Cat's you are removing to put the Loops on.
Note: Belly pan fits just fine with Cats on also.
As you can see in pic below the Loops set higher than the center stand and higher than the lower rear suspension link.

[jm21ddd15]

No problem...I have both, a ss belly pan and Loops... there is NO issues as the Loops actually take less room than the Cat's you are removing to put the Loops on.
Note: Belly pan fits just fine with Cats on also.
As you can see in pic below the Loops set higher than the center stand and higher than the lower rear suspension link.

Just looking at the pics, I am wondering what your up to, something with the pipes? Or maybe something new?

[BIGLRY]

Those are the torque loops being installed... then I put on a set of "Dr. Jekill & Mr Hyde" adjustable exhaust pipes https://www.jekillandhyde.com/en/brand-selector



OPEN = sounds like a Porsche on steroids


CLOSED = sounds completely stock


Here is how it works https://www.jekillandhyde.com/en/how-it-works
The heart of the system https://www.jekillandhyde.com/en/the-valve
When you start the bike the valve is always closed. When you push the button on your handlebars once, the valve will open up completely and your exhaust is set in the performance mode. Click it again and the valve fully closes again. When you double click the button, the valve will be opened to 50% and you ride in the dynamic mode*.

*For riders with a blackbox the amount the valve is open is determined by how long you push the button. I have the blackbox system so I can set my exhaust to any note I want