So, I got my new-to-me 2015 in yesterday, and was able
to look over it a little. I have a few questions to which
hopefully some of you more experienced guys might know
the answer...
1) What's the little square next to the cubby lock on the
right fairing?
2) What's under the cover in the right fairing, and why
isn't there more storage there?
3) I removed the badges, which went well, except there
is some discoloration under the "Anniversary Eagle" and
the "H" and "N" of the front HONDA badge. It has no
varying texture to the touch. Any recommendations on
remedying that on a matte silver?
4) What does a clutch job usually run? This thing definitely
needs a clutch.
5) Is the intercom cable a powered line? I will never utilize it.
6) Following the instructions, I can't get to the screen to
customize the "opening ceremony" sequence. Am I missing a trick?
7) Is there an aftermarket rear brake pedal in black?
8) Are the stock stereo speakers silver in the middle? Not sure
if mine are stock or aftermarket.
9) What are the best after market slip-on mufflers to use with Torq Loops?
I'm sure I'll have more questions as time goes by. I was
happy to see the previous owner installed many of the
mods I was planning anyway, which has greatly reduced
the money I have to spend, of course! It came with:
- Switchback red/amber rear LEDs.
- Strobing brake LEDs
- Switchback white/amber running/fog LEDs
- Smoke front running/turn signal lenses
- 12v power supply in glove box
- Ergo III highway pegs (I'll be replacing them with Aeros)
- Torq Loopz
- Aftermarket shield (I thought it was a Stad, but it's something similar)
I officially have the following on order:
- Pathfinder LEDs for all the H7s
- Switchback LEDs for the front running/turn signal lights
- Taller passenger backrest for my wonderful bride
- Bluetooth/amp/ground isolator mod found here: https://www.youtube.com/watch?v=dTlof-fr1w8&t=165s
- Gear indicator
- Kuryakyn "Transformer" passenger floorboards
- Rivco Aero footpegs to replace the Ergos
Reply With Quote