It's easy to remove. My suggestion is to search YouTube for or "F6B Coolant Change" or "F6B Air Filter Change." You'll get MORE information than you need now but, for future reference, it's also good to see how the entire shelter comes off.

Basically you remove the entire outer plastic strip by pulling on the bottom side of the plate under the panel with the glove compartment lock. The "plate" where the Hopnel EZ-Clip will be mounted.

Pull out and up all the way up the strip being careful of the tab at the top of the strip.

I marked my holes, drilled, and mounted. Be conscious of the space behind the panel for the bolts. I used flat head screws and did a little counter sink on the back side of the holes so the heads where flush as possible and the threads stick outside with the nuts on the outside.