F6B emblem paint
Results 1 to 5 of 5

Thread: F6B emblem paint

  1. #1
    Junior Member
    Join Date
    Oct 2020
    Location
    NC
    Posts
    10

    F6B emblem paint

    My F6B has the matt finish and black pipes, etc..............I would like to paint the f6b emblem black also. Thinking about taking it to a paint shop but also not sure if "can" spray paint would look good enough.
    Want it to be permanent and look good.
    Any suggestions.

  2. #2
    Senior Member JackB's Avatar
    Join Date
    Jun 2014
    Location
    Two Rivers Wi
    Posts
    810
    I haven't tried it yet but you could use peel-off paint it's about $10 a can.
    If you don't like it you can peel it off.

  3. #3
    Senior Member Switchmonkey's Avatar
    Join Date
    Jul 2016
    Location
    Petawawa, ON
    Posts
    147
    Try PlastiDip. Tape off an area around the emblem and give it a good 4 or 5 coats. When you peel away the tape from the edges, it grips onto the emblem and looks good. You can peel it off if you get tired of it.
    2016 F6B Matte Grey
    2016 XDiavel (Sadly...gone)
    2014 M109r (FHD Classic) (Sadly...gone)
    2014 VRSCF (Gone)
    2006 VTX 1300C (Gone)

    "I find as I get older that I have less and less to say about more and more. I thought I was mellowing as I got older, turns out I just donít give a sh1t.Ē

  4. #4
    Senior Member shortleg0521's Avatar
    Join Date
    Sep 2014
    Location
    fredrick. maryland
    Posts
    1,194
    It will cost more but I would order replacements and sand and paint myself with rattle can.
    They come on a strip. All you have to do after painting is run tape at top and bottom
    of letters to show where the new ones go. Remove the old and place the new.
    I know it sounds like work but if want to do a good job it takes work.

  5. #5
    Junior Member
    Join Date
    Oct 2020
    Location
    NC
    Posts
    10
    Thanks...I agree

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •