Before I went to my Go Cruise throttle lock, I tried a Cramp Buster. It took too much throttle area for my taste so it was immediately abandoned. Anyone else tried accessories that did not work out as planned?
Before I went to my Go Cruise throttle lock, I tried a Cramp Buster. It took too much throttle area for my taste so it was immediately abandoned. Anyone else tried accessories that did not work out as planned?
[SIGPIC][/SIGPIC]
Actually, my Go Cruise doesn't work well at all. It will hold the throttle position for a second or two, then slowly allows the spring return pull to reduce my speed. I don't know if I need to "rough" up the plastic grabber portion to dig deeper into the supplied elastic, or try to go thicker on the elastic.
I would contact the manufacturer. Explain what's going on and see what solutions they may provide.
I posted this on another thread. Place a small zip tie in the hole closest to the grip and tighten it to the tension you desire. Works really well.
image.jpg
[SIGPIC][/SIGPIC]
I just got my 7/8 Go Cruise (unheated grips). I didn't like the feel of it directly on the handlebars, but it seems good with the included silicone band.
Are you using the 7/8" or 1" ?Actually, my Go Cruise doesn't work well at all. It will hold the throttle position for a second or two,
I had the same problem a few weeks ago when I first installed the GoCruise. It would just gradually release the throttle. I visited their web site to look at some pictures and I noticed I had it on upside down. Just the way your picture shows. Once I turned the piece 180deg over it now works great. Try it it works.
http://www.2wheelride.com/throttle_pro.html
Holes on top,,, Just like the vid,,,