The radio may use a fuse for the radio and a separate one for memory, channel presets.
Not sure some cars do. Just my 2cents.
The radio may use a fuse for the radio and a separate one for memory, channel presets.
Not sure some cars do. Just my 2cents.
ITS ALL GOOD
masonmike - Glad to hear that your problem is resolved. Congrats!
Apologies for the somewhat cluttered fuse box diagram. Way back, back, back when I sourced my manual, the F6b ones were in short supply so I ended up with a manual for the full Gold. Wing circa 2010 if I recall correctly. While that means that it includes systems that the F6b does not (reverse, factory cruise, rear suspension adjustment, etc), it's been "close enough" for most things I've needed.
Thanks for keeping us updated. It's good to know that overloading the 12V power port (we used to call those lighter sockets) doesn't damage any expensive electrical components.
I think Honda's manuals covering the F6B were always in short supply. I was lucky enough to find one in 2014, and it even came with the fancy binder!
Here's the fuse box diagram for the F6B:
Here's a question for the electronics guys: why don't vehicle radios and clocks use non-volatile memory (like in flash drives) so the presets and clock time don't get lost when the battery is disconnected?
Because they would need to incorporate a battery into each item. Now they would have to decide is it going to be a rechargeable battery or one like inside of things like computers, yes there’s button batteries in side your computer. If it were say a rechargeable battery it would also need a system to supply power to the charging system. That would be required of every thing that now goes blank when battery power is lost. $ and weight.
It has to come down to cost. Why install non-volatile memory or a "watch" battery when you already have a constant 12VDC source. Yes, you would keep everything "stored" when one removes the leads to the battery but that SHOULD happen on very FEW occasions. Also it would take a LOT more to power a crystal oscillator and keep a timer/clock going than a standard USB has to simply refresh it's "stored" ones and zeros data.
It does make sense for the radio and other settings but adds more cost to an industry that has done it the other way for many years.
Last edited by SeaSteve; 04-26-2021 at 09:25 AM.
2016 F6B Standard Matte Silver. Freedom Combat Slip-Ons, BaggerShield 11" - 19" Sport Shield, Kuryakyn Ergo II Highway Pegs, Ultimate King Seat w/Driver Backrest, Pathfinder Running/Turnsignal/Driving Lights, Beeline Moto Navigation, INNOVV K2 Camera, DHS Racing Shifter Linkage Upgrade, Show Chrome Handlebar Risers and Luggage Rack.
Sorcerer - 100% agree with you that the clock would need a battery still, to keep the time counting. For radio station presets, I think non-volatile RAM (EEPROM, etc) would work, since there's only the need for storage of information, not time-keeping. I agree with you though that even that small improvement is held up by cost, since volatile RAM is much cheaper.
I did some online research into the memory in automotive electronics. I always thought it would make sense to use non-volatile memory, which requires no power at all to retain information (like a USB flash drive), to store data like the station presets. Apparently newer 'infotainment' systems do use flash RAM to store information entered by the user. Modern vehicles store much more information than radio presets. They retain seat position settings, bluetooth phone and other streaming device ids, and favorite locations for the nav system. Reentering all of this after simply disconnecting the battery would be a chore. Since the newer Wings have Apple Carplay (and maybe added Android Auto) I wouldn't be surprised if they use non-volatile memory too.
On a related subject, I always wondered how those old car radios with the 5 mechanical preset buttons worked. It was pretty neat that you could tune to a station, pull a button out, then press it all the way to somehow store the dial location in that particular button. I finally got curious and found a diagram online. It's amazing how things worked back in the pre-digital age.