Quote Originally Posted by motozeke View Post
How would you run wires from the 12V plug to the handlebars if the plug is inside the cubby?
The correct, and easiest way to do this is buy the splitter adapter, and plug that splitter into the RED connector under the left side cubby.

Once you remove the left side cubby, you will find a fairly clear looking rubber boot, that has a GREEN connector, and a RED connector.

The GREEN connector is for plugging in your Aux. audio device, such as a MP3 player, and I-Pod, etc. There is a wire that comes with the bike...should be inside the left cubby, or maybe in a saddlebag, maybe in a plastic bag that possibly had the owners manual in it. That WIRE...with a GREEN connector on the end, will plug into the GREEN connector under the left cubby.

Then...the RED connector is left down there, so you buy a splitter adapter, which allow you to have a Y-splitter...or a Y-connector...so you can plug a wire into one of the legs of the Y...and use that as a power source that mounts inside the cubby....and you can run a power wire to the other leg of the Y...so that you can power up items like a GPS, or a Radar Detector, and have those items mounted on the handlebars, or up on the dash...wherever you like.

There is MORE than enough power coming out of that RED connector under the left cubby, to power up the normal things we use up front. Example, I have a splitter adapter plugged in on mine, and I have one power source going to the inside of the cubby, and another power source going to my GPS that is mounted on the left handlebar area. The power source INSIDE the left cubby feeds power out to my Valentine One radar detector, mounted on the right handlebar.

By removing the left side cubby...and also the dash itself, you can have access to route all the wires you need to, up the handlbars.