Mini floorboards for rider

[Scotrod]

Tilted mine 1 notch down in the front. Ankles are happier and easier to upshift/brake.
Wearing steel toe Timberlands

[Richie]

Can you buy just the drop mounts and use your pegs?

Richie

[Scotrod]

Can you buy just the drop mounts and use your pegs?

Richie

Nope. No, nada

[1951vbs]

I bought the mini boards with drop mounts and mounted them in the furthest back position. No problem with shifter/brake actuation but I would tend to ride with my heel on the board and arch on the front edge. Just wasn't comfortable so I spent another $60 for KuryAykn Kinetic pegs and really like them. Not sure how much ground clearance I've lost for sure. The pegs are not real long and have some curve to the shape but I was dragging the mini-boards a little without trying.
Attachment 2395

[Scotrod]

Any plans for the boards you are no longer using?

[1951vbs]

Any plans for the boards you are no longer using?

No Plans. PM me and I will send you photos. Slight rash on bottom edge of one.

[coffee_weasle]

I bought the mini boards with drop mounts and mounted them in the furthest back position. No problem with shifter/brake actuation but I would tend to ride with my heel on the board and arch on the front edge. Just wasn't comfortable so I spent another $60 for KuryAykn Kinetic pegs and really like them. Not sure how much ground clearance I've lost for sure. The pegs are not real long and have some curve to the shape but I was dragging the mini-boards a little without trying.
Attachment 2395

i have the mini-boards, would rather have pegs,

question.... do the kinetic pegs fit to the "drops" at the rotary spline?
i can't seem to find any picture showing the spline area

any help would be great

thanks
steve

[1951vbs]

i have the mini-boards, would rather have pegs,

question.... do the kinetic pegs fit to the "drops" at the rotary spline?
i can't seem to find any picture showing the spline area

any help would be great

thanks
steve

Yes they will mount right up to your drop mounts. I had to take them off and go back to stock pegs because they touch down way to easy for me.

[SHOCKER7718]

Kuryakyn makes an all black mini board set that comes with the adapter for F6B and the drop mount. You can also tilt the boards forward a little bit for additional comfort. Kickstand access doesn't seem to be a problem for most riders since the boards are just over 5" long. The end of the stand is not covered by the board.

We are currently out of stock but expecting another set later this week.

http://www.texascyclechrome.com/prem...dsgl18blk.aspx

Can you make these many floorboards work on the passenger pegs area?

[SHOCKER7718]

Installed my Kury black, drop mount mini boards yesterday in the position as shipped by the factoy. Had a problem with the tight quarters under the shifter (with only a size 11 boot). I didn't mess with them at that time because it was 108 degrees out and I was done for the day. Today I adjusted them two notches/clicks down on the forward end. End of problem. Ideal access to the shifter and also a much better position to the brake pedal. There's no need for me to consider moving the boards rearward. I've never cared for the looks of large boards. I've also imagined that they would limit my ability to flex my ankles fore and aft to change the position of my feet for comfort. These mini boards eliminate that concern. There is an additional fringe benefit. The size and shape of the boards have eliminated the tendency of my pant cuffs to try getting hung up on the pegs as I put feet down. I'm a happy camper.

Can you make these mini floorboards work on the passenger pegs area?