Installed the tinted front turn signal lenses at the same time as I replaced the front reflectors w/da LED's. Shop manual and McGyver belly pan came today.
I REALLY like the smoked turn signal lenses
Installed the tinted front turn signal lenses at the same time as I replaced the front reflectors w/da LED's. Shop manual and McGyver belly pan came today.
I REALLY like the smoked turn signal lenses
I got the front reflector signals in and the adapters. I understand that I don't use the y connector included with the signals. What I don't understand is that the signals don't have a plug and play connector on them just 3 prongs that need to be inserted into a connector. From reading the instructions for installation and looking at the pics there will be 2 small connectors left open for accessories and these prongs won't go into either of them? I'm confused............
My lights came with 3 prongs on the end of the wire not a plug and play connector. I understand that you do not use the y adapter that came with the signals, I use the 7301 kit that I ordered. My question is according to the pics once the 7301 y adapter is installed I am left with 2 small female connectors that the 3 prongs will not plug into to. My lights end in 3 wires, not an oem style connector. Where do I plug in the 3 wires at the end of the lights?
I may be having a senior moment but in your L.E.D. Front reflector Conversion Kit #7448 I think you should have (2) little black plastic housings, you have to match the ,step 8 in directions, black, red and white wires of the reflector wires, loose ones I think, put them in the suplied black housings so that when you plug them into the oem syyle block at the mirror, they match up,per step 8, Blk/blk,red/green, white/red, make sense? or those little black things come w/ kit 7330 ? can't remember, hope it helps.