So I saw someone had them and thought wow that's pretty cool. Since I'm a pretty industrious guy I thought I bet I could make those myself for next to nothing. Low and behold I think i was right.

Parts needed. the 2 mini LED light strips from just about any auto parts retailer (I went to Autozone) for about $15 and some wire. I have the accessory outlet so I just tapped into the power and ground from there so when the key is on they are on.

Simple instructions:
Mark out with a pencil or permanent marker through the openings onto the black plastic dust cover behind the "hood". I used some blue painters tape to outline where I had to stick the new LED's.
Pop the front cover off and stick the LED's on
Run wires over to the accessory area under the left pocket and wire up.
Zip tie as needed. I added a couple zip ties to the LED's as well just to make sure if the tape ever started to lift up.

Job done in about 30 minutes for less than $20.



Don't mind the foam, the windshield was squeaking for some reason so I "fixed" it lol