We have had a couple of people PM us on the Amber Skinni Mini install on the front of our F6B.
I have a couple of pictures that will help with the location. You will need to start both LED Strings from the top middle going down to the sides. The top middle will be at the very edge as shown.
The sides are on the exact edge of the inner piece. You can not place it back from there, they will not be seen correctly. The wiring can come back up from the sides and go behind the trim piece coming out up top below the triple tree. You will want to take a dremel tool and slightly make an indentation in the lower trim at the edge, for the wires to slide under.
I have these wired to a Kuryakyn Master Cylinder Accessory Switches. I wanted to be able to also run them with Fusion Lighting when I get around to installing that. You could hook these up to be on all the time if desired.
Attachment 6360Attachment 6361Attachment 6362