Quote Originally Posted by Flat6 View Post
BARRYS770;


Great job, and good info. I installed this same unit on my Rune, and am really pleased with it.
Curious why you set the "engine/set up" at 4 cylinder instead of 6.
What is the minimum speed you can set with the pulses/mile setting at 19,300 ?
Thanks.
When I started this project, there wasn't any information available for installing a cruise control on the F6B. I had installed an Audiovox unit on an ST1300 and the Rostra unit on a couple of Street Rods, so I had somewhat of an idea as to what was ahead of me. Even though I was familiar with the cruise control units and confident that it could be made to work, I knew from the beginning that this was going to be an experiment that might not work out.

I arrived at the settings primarily by experimenting with different settings. The 6 cylinder setting made the bike surge once the cruise was engauged. So, I set it 4 cylinder, low which eliminated the surging while the cruise was set. My after further testing, I settled on the following settings;

Gain: Very Low
Pulses/mile: 19,300
Engine/ Set up: 4 cylinder Low
VSS: Square Wave
Transmission: Manual
Control Switch: Open