DeanB - If you have the 08 full wing throttle body, that will be easier. It already has the cruise cam to hook to.

The cable cam closest to the throttle body is the one for the throttle, and the one outer is the cruise. On the F6b, it has the throttle cam but not the cruise cam. It DOES still have the dowel cast into the throttle cam, which is the "finger" that the cruise cam catches on to make the throttle move. That dowel is what I used to hook to. I simply drilled the dowel, slid the ring on the end of the cruise cable onto that dowel and pinned it in place through the newly drilled hole. Our F6b throttle body already has the bracket to hold the cruise cable sheathing, too...so mounting it all was really simple.

The throttle body had to be removed even to do it the way I did (to drill the dowel), so it'd just super easy just to pop on the 08 throttle body you have and save the trouble.