Goldwing seats

[DMAGOLDRDR]

Turns out the seat I picked up was an Ultimate off an 08 Wing not a stock seat off a new Wing. You will see a gap along the bottom of the seat, that is because I didn't get a picture while the bolts were in. In the picture the seat was just sitting in place..

The Wing seat will sit in place and bolt up BUT as we figured, BUT the rear of the seat pan will need to be cut and narrowed to access the F6B saddlebag latches also need to be made a bit longer to cover the area where the Wings Trunk would be.

All in all the Wing seat can be used but will take some major changes to the seat pan, foam and cover all at the rear of the seat. Mainly due to the saddlebag latches.

[98valk]

Thank you, thank you, thank you! That's what we wanted to know.

It actually fit better than I thought it might. But, that is a pretty big gap to fill somehow ... Hmmmm .....

[thumper 549]

When someone says it cant be done, it usually means someone else will make it done.

[thumper 549]

To answer my own self-
I was just checking frames on eBay-
They are the same back to at least 2002 afaik or can tell.
So- the seat should actually fit .
One might have to add some other gold wing stuff to the F6B.
As soon as I find a seat I will try it, as all my bikes end up with split personalities.