Turns out the seat I picked up was an Ultimate off an 08 Wing not a stock seat off a new Wing. You will see a gap along the bottom of the seat, that is because I didn't get a picture while the bolts were in. In the picture the seat was just sitting in place..

The Wing seat will sit in place and bolt up BUT as we figured, BUT the rear of the seat pan will need to be cut and narrowed to access the F6B saddlebag latches also need to be made a bit longer to cover the area where the Wings Trunk would be.

All in all the Wing seat can be used but will take some major changes to the seat pan, foam and cover all at the rear of the seat. Mainly due to the saddlebag latches.