OK I might go bigger
Results 1 to 10 of 16

Thread: OK I might go bigger

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Darkknight's Avatar
    Join Date
    May 2013
    Location
    Enfield ct
    Posts
    345

    Got it!

    Ok, here is the 11 inch Baggershield sport shield.
    I have it set all the way into the lowest position. The slots in the windshield will allow it to be adjusted up to 12 3/4 inches I believe the spec says. Although you will have to remove the fairing nose again to do that.
    I also have a Geza cover that I intended to be for my stock shield and it still fits this new one with probably a couple inches to spare. Geza must have thought ahead and knew the stock shield was going to be replaced.
    So here's the before, after and with the cover installed.
    20130705_120627.jpg20130705_123234.jpg20130705_131428.jpg
    It took about 15 minutes to install. I haven't tried it out yet, but I will in a few minutes.

    It's 92 degrees here in ct and it feels like 98. We don't get the "dry heat" whatever that is.


    As soon as I cool off a bit I'm hitting the highway see if there is any difference.

  2. #2
    Senior Member Limbuck's Avatar
    Join Date
    May 2013
    Location
    Tennessee
    Posts
    100

    Windscreen

    I got BaggerShield adjustable and am very happy with it. A couple of pretty good runs under my belt and I do not see a need for me to use the upper clear portion. I will keep it invert mounted just in case long haul in rain or something. I am 6'1".

  3. #3
    Senior Member MercuryF1's Avatar
    Join Date
    May 2013
    Location
    Malaysia
    Posts
    139
    Quote Originally Posted by Darkknight View Post
    Ok, here is the 11 inch Baggershield sport shield.
    I also have a Geza cover that I intended to be for my stock shield and it still fits this new one with probably a couple inches to spare. Geza must have thought ahead and knew the stock shield was going to be replaced.
    So here's the before, after and with the cover installed.
    That is comforting to know the standard Geza gear cover fits the Baggershield! I am still waiting for the cover to arrive from USA. I didn't buy a new 11 inch sports shield instead I am using my old Baggershield from my GL18. (12 inches high & 29 inches wide) so hopefully it will be ok!

    IMG_6191.jpg

  4. #4
    I bought the 13" based on the recommendations of CeeBailey's website. I'm about 5'11" and found the shield to be a bit short for my tastes, so I now have their 15". I like to look over the shield, preferring to have the windshield at a height where my nose would rest on the top edge (moustache level) . The 15" is just a tiny bit lower than that, which is good enough for me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •