Grip Puppies

[edgeman55]

Okay. I had 3 requests for the Grip Puppies. I do happen to have 3 pair but ,I cut an inch off of one to accommodate my go-cruise. In fairness Dirtstiff was 1st
Edgeman was 2nd and.. hehe ..Slowpoke ( pun intended) was 3rd to respond. I will send my 3rd set to Slowpoke even though I trimmed one so maybe it won't be a big deal or at least he can try em' out. BTW they are only tube dense foam insulation that happens to slide over the grips with a soap solution, I used windex. As soon as I can get to the post office , Probably tomorrow I'll send them out.

Thanks again for the pay foward on this Rob.Look foward to trying these out and if they don't work for me I will offer them out like you did.

[CaptRob]

they are in the mail gentlemen.

[bob109]

USPS finally delivered my Grip Puppies today. Received 4 pair, just what I ordered, so I have some spares on hand! Installation was a breeze. A misting of Ammonia/Water mixture on the grips and inside the Puppie Tubes and they slid into place with ease. Based on just 11 months of service from the first pair, I should be good for several years

[smokinjoe187]

after my first year of using them i finally ordered 2 more pair
one pair 4.5 inches to accomodate my throttle lock and a 5 inch pair for the other side..
now i have new ones and a set of spares

[Dirtstiff's F6B]

they are in the mail gentlemen.

Thanks for your generosity Capt. I got them today and installed, Thanks!!

Jim

[edgeman55]

Thanks for your generosity Capt. I got them today and installed, Thanks!!

Jim

Thanks again for mine Capt Rob.Just got home and they were waitin for me in the .Will install them in a few minutes and look foward to trying them out tommorow.

Gene

[CaptRob]

Thanks for your generosity Capt. I got them today and installed, Thanks!!

Jim

No worries enjoy

[CaptRob]

Thanks again for mine Capt Rob.Just got home and they were waitin for me in the .Will install them in a few minutes and look foward to trying them out tommorow.

Gene

You got it!!

[Texas TC]

I put original GP's on my F6B when I first got the bike. After 14 months and almost 19000 miles, they are still in great shape. The OEM grips are just too small for me. Also, I didin't find GP's to be hot at all last summer in the hot Texas sun. I always ran similar grips on my Harley's so they feel just right in my hands. I guess, like everything, personal preference.

Attachment 5855

[bob109]

Just replaced my Puppies! This is the third set for me! Got 11 months from the first pair and 17 months from the second pair. The right puppy began to separate, so off with the old and on with the new. Made a change to my installation procedure. The first pair I used a 50/50 mix of Ammonia and water which worked OK. This time around I used a drop of Dish Washing Detergent with a little water and a acid brush to apply the mixture to the OEM grips. The puppies literally slipped right on. Then took my air gun and gave each a shot of air to memove any water/soap residue. Worked like a charm.

I love the feel of the GP's. With my big mitts, the increased diameter over the OEM grips makes for a perfect/comfortable fit