For $13.00 and a little work with the garage power tools you can't beat that
For $13.00 and a little work with the garage power tools you can't beat that
Very nice work Bob!
Let it be known and let it be written, this is the best bike I've ever owned, and I ain't shittin!
When I saw 6 pound limit on the Honda site I almost blew beer out my nose. Who in the world would ever pack only 6 pounds worth of stuff?? Some luggage weighs six pounds with nothing in it! I just did about 800 miles over the weekend with my large camlebak loaded to the seams and bungeed it to the back seat-rest and handles, it weighed about 25-30 pounds. No problems at all, If riding two-up is not a concern for you, go with a seat bag, much more practical than 6 pounds. *end rant*
Still Wingman after the site crash!
I ride solo all the time! I have a "Cruiser Bag" which always occupies the rear portion of my seat. I wanted the rack to carry my sleeping bag which is bulky but light. Using my small stretch net I can quickly secure the S bag to the rack.
The Cruiser Bag is constructed of 13" diameter PVC Pipe and covered in vinyl. Between my saddle bags, the rack and the C Bag, I should be able to take the kitchen sink when I travel
The Cruiser Bag.
100_0752.jpg
Nice lookin rack...round the back corners to mimic the F6 and you wil have something there !!!
I had approx 20# on my stock rack and it never complained...not sure where the weight rating comes from...it is bolted on top of the frame ?
" Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com
Still playing around with my Homed Brewed Luggage Rack. Spent a hour at a friends shop and used his engine lathe to turn the support spools for the rack. Had a piece to 7/8" aluminum round stock which I drilled and parted to size. The offset in height between the front and rear backrest mounting holes is 5/8". Made two spools 1 1/8" long for the front and two 1 3/4" long for the rear. Those lengths put the rack on a even plane. Im going to paint the spools satin black which will closely match the backrest bracket.
A few pics
100_0820.jpg100_0825.jpg100_0823.jpg100_0821.jpg100_0822.jpg