My adventures in F6B Audio Upgrade - Page 17
Page 17 of 18 FirstFirst ... 789101112131415161718 LastLast
Results 161 to 170 of 178

Thread: My adventures in F6B Audio Upgrade

  1. #161
    Senior Member Dirtstiff's F6B's Avatar
    Join Date
    Nov 2013
    Location
    Pacific North Wet
    Posts
    948
    OEM holes measure 1 3/8". Hertz spec says 25.mm which is an inch. I think they will snap right in.
    Thanks for the measurement.20180317_142754_resized.jpg
    4 Wheels Move the Body
    2 Wheels Move the Soul
    In Loving Memory of My Brother
    "Death Waits In The Dark"

    2013 F6B Deluxe

  2. #162
    Senior Member F6Pilot's Avatar
    Join Date
    May 2014
    Location
    Chattanooga, TN
    Posts
    412
    They will go in after you VERY VERY CAREFULLY cut the grills off. If you aren’t careful, you’ll wind up with the following, requiring an additional purchase.

    You don’t want this....

    D0208C98-F7F8-4005-9E35-C228141FC1A7.jpg

  3. #163
    Senior Member F6Pilot's Avatar
    Join Date
    May 2014
    Location
    Chattanooga, TN
    Posts
    412
    This is after grill removal, trimming down the housing, wrapping with heavy duty two sided tape, and pressing it into place.

    63DF96F0-1B9E-4DDA-AAAD-38310B898E89.jpg

  4. #164
    Senior Member F6Pilot's Avatar
    Join Date
    May 2014
    Location
    Chattanooga, TN
    Posts
    412
    Ok, I got some dimensions on the tweeters. The stock tweeter is 1.41”, Hertz before grill removal is 1.49” but after removal is 1.42”.

  5. #165
    Senior Member Dirtstiff's F6B's Avatar
    Join Date
    Nov 2013
    Location
    Pacific North Wet
    Posts
    948
    Thanks Pilot,
    Looking like I'll have to figure out how to get the grills off the HT 20 tweeters, to get them in the OEM grills, from the back of the grill.
    Jim
    4 Wheels Move the Body
    2 Wheels Move the Soul
    In Loving Memory of My Brother
    "Death Waits In The Dark"

    2013 F6B Deluxe

  6. #166
    Senior Member F6Pilot's Avatar
    Join Date
    May 2014
    Location
    Chattanooga, TN
    Posts
    412
    I will try to locate some additional pics to send your way. Check your PM.

  7. #167
    Senior Member Dirtstiff's F6B's Avatar
    Join Date
    Nov 2013
    Location
    Pacific North Wet
    Posts
    948
    How do you guys have the crossover set?
    + normal or -

    Thanks
    4 Wheels Move the Body
    2 Wheels Move the Soul
    In Loving Memory of My Brother
    "Death Waits In The Dark"

    2013 F6B Deluxe

  8. #168
    Senior Member Jimmytee's Avatar
    Join Date
    Jul 2014
    Location
    Elizabethtown, Kentucky
    Posts
    2,296
    Quote Originally Posted by Dirtstiff's F6B View Post
    How do you guys have the crossover set?
    + normal or -

    Thanks
    Normal on mine
    "Go sell crazy somewhere else, we're all stocked up"

  9. #169
    Senior Member Dirtstiff's F6B's Avatar
    Join Date
    Nov 2013
    Location
    Pacific North Wet
    Posts
    948
    Thanks Jimmie.
    This new site is useless for searching old facts.
    Do you remember what the polarity is of the rear speaker wires?
    Left channel -
    Blue / Red
    Orange


    Right channel
    White
    Blue
    4 Wheels Move the Body
    2 Wheels Move the Soul
    In Loving Memory of My Brother
    "Death Waits In The Dark"

    2013 F6B Deluxe

  10. #170
    Senior Member Jimmytee's Avatar
    Join Date
    Jul 2014
    Location
    Elizabethtown, Kentucky
    Posts
    2,296
    Quote Originally Posted by Dirtstiff's F6B View Post
    Thanks Jimmie.
    This new site is useless for searching old facts.
    Do you remember what the polarity is of the rear speaker wires?
    Left channel -
    Blue / Red
    Orange


    Right channel
    White
    Blue
    I don't remember off the top of my head. WOuld have to look at the schematic again. You could use a digital multimeter and play source material, noting which lead is attached to what wire. If the meter measures your DC voltage output as positive, you know ,by your meter leads , which one is positive and negative. I no longer us any of the factory wiring as my system is totally aftermarket now. The only thing stock is the handlebar controls.

    As far as the crossover , I lefet mine normal. I can adjust individual frequecies through the head unit.
    "Go sell crazy somewhere else, we're all stocked up"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •