My adventures in F6B Audio Upgrade
Results 1 to 10 of 178

Thread: My adventures in F6B Audio Upgrade

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Dirtstiff's F6B's Avatar
    Join Date
    Nov 2013
    Location
    Pacific North Wet
    Posts
    948
    OEM holes measure 1 3/8". Hertz spec says 25.mm which is an inch. I think they will snap right in.
    Thanks for the measurement.20180317_142754_resized.jpg
    4 Wheels Move the Body
    2 Wheels Move the Soul
    In Loving Memory of My Brother
    "Death Waits In The Dark"

    2013 F6B Deluxe

  2. #2
    Senior Member F6Pilot's Avatar
    Join Date
    May 2014
    Location
    Chattanooga, TN
    Posts
    418
    They will go in after you VERY VERY CAREFULLY cut the grills off. If you aren’t careful, you’ll wind up with the following, requiring an additional purchase.

    You don’t want this....

    D0208C98-F7F8-4005-9E35-C228141FC1A7.jpg

  3. #3
    Senior Member F6Pilot's Avatar
    Join Date
    May 2014
    Location
    Chattanooga, TN
    Posts
    418
    This is after grill removal, trimming down the housing, wrapping with heavy duty two sided tape, and pressing it into place.

    63DF96F0-1B9E-4DDA-AAAD-38310B898E89.jpg

  4. #4
    Senior Member F6Pilot's Avatar
    Join Date
    May 2014
    Location
    Chattanooga, TN
    Posts
    418
    Ok, I got some dimensions on the tweeters. The stock tweeter is 1.41”, Hertz before grill removal is 1.49” but after removal is 1.42”.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •