Quote Originally Posted by Jimmytee View Post
Well this is a pic of it just sitting in the box. Now it is in the box and I pulled all the connectors that I am not using back into the box. There are four complete sets of preouts, 2 sets of auxillary inputs, plus CAN connectors not used and a thing or two else, I am not using. I stuffed the unused stuff back into the box. I also ran a 1/4" x 20 screw on each side with nuts capturing the unit to mount it through the bottom. Also the steering wheel adapter from PAC is in that box with the stereo as well. This was just the initial pic I took when I set it in there.

That's what I had pictured in my mind, as far as the factory harness that went into the box. Did you just leave under the seat secured and some kind of cap or cover on the ends, I know you said you had tapped into it for the steering wheel adapter.