My adventures in F6B Audio Upgrade

[Dirtstiff's F6B]

Jimmie or Pilot,
Could either measure the circumference - diameter of the HSK tweeter with the grill on or off, if it comes off?

I've removed the OEM tweeters; piece of cake, push on the tabs and they come out without any drama.

Trying to mentally fit the HSK tweeters before they arrive.

Thanks.

[F6Pilot]

I believe can get you some measurements tomorrow

[Dirtstiff's F6B]

OEM holes measure 1 3/8". Hertz spec says 25.mm which is an inch. I think they will snap right in.
Thanks for the measurement.20180317_142754_resized.jpg

[F6Pilot]

They will go in after you VERY VERY CAREFULLY cut the grills off. If you aren’t careful, you’ll wind up with the following, requiring an additional purchase.

You don’t want this....

D0208C98-F7F8-4005-9E35-C228141FC1A7.jpg

[F6Pilot]

This is after grill removal, trimming down the housing, wrapping with heavy duty two sided tape, and pressing it into place.

63DF96F0-1B9E-4DDA-AAAD-38310B898E89.jpg

[F6Pilot]

Ok, I got some dimensions on the tweeters. The stock tweeter is 1.41”, Hertz before grill removal is 1.49” but after removal is 1.42”.

[Dirtstiff's F6B]

Thanks Pilot,
Looking like I'll have to figure out how to get the grills off the HT 20 tweeters, to get them in the OEM grills, from the back of the grill.
Jim

[F6Pilot]

I will try to locate some additional pics to send your way. Check your PM.

[Dirtstiff's F6B]

How do you guys have the crossover set?
+ normal or -

Thanks

[Jimmytee]

How do you guys have the crossover set?
+ normal or -

Thanks

Normal on mine